AEROCOOL VERKHO2 CPU chladič s 90 mm ventilátorom, hydraulickým ložiskom, 800–2000 RPM, 110 W TDP, podpora viacerých socketov

AEROCOOL VERKHO2 CPU Cooler is a compact air cooler designed for mainstream desktop builds. It uses a 90 mm fan with a hydraulic bearing that runs between 800 and 2000 RPM, producing up to 23.6 CFM of airflow and acoustic levels in the 15–25 dB range. The cooler is rated for processors with up to 110 W TDP and offers broad compatibility with Intel and AMD socket families, making it suitable for many legacy and modern systems where space is limited and reliable, quiet cooling is required.

Advantages

The 90 mm hydraulic-bearing fan balances airflow and noise for everyday use, and the 800–2000 RPM speed range allows the cooler to respond to varying CPU loads. With a rated 110 W TDP the VERKHO2 handles mainstream processors while its compact footprint fits in smaller cases. Multi-socket support for a wide range of Intel and AMD sockets eliminates compatibility concerns for many upgrades or replacements.

Suitable for (tasks / use cases)

• Compact desktop builds and small form factor cases
• Mainstream office and home computers
• Quiet everyday computing and light multitasking

When it may not be suitable

This cooler is not intended for high-end overclocking or sustained heavy workloads that exceed its 110 W TDP rating. Enthusiast gaming rigs, workstations running prolonged CPU-intensive tasks, or systems requiring very low temperatures under heavy load may need a larger tower cooler or an AIO liquid solution.

Key specifications

• Fan diameter: 90 mm
• Fan bearing: Hydraulic bearing
• Fan speed: 800–2000 RPM
• Airflow: up to 23.6 CFM
• Noise level: approximately 15–25 dB
• Thermal Design Power (TDP): 110 W
• Supported processor sockets: Intel LGA 775/1150/1151/1155/1156 and AMD AM2/AM2+/AM3/AM3+/AM4/FM1/FM2/FM2+

How to use

Install the AEROCOOL VERKHO2 onto a supported CPU socket following the included mounting instructions. Apply a thin, even layer of thermal paste on the CPU heatspreader if paste is not pre-applied, align the cooler over the socket, and secure it with the provided brackets or screws. Connect the fan cable to the CPU fan header on the motherboard to allow automatic speed control. Verify clearance around memory modules and adjacent components before finalizing installation.

What to consider before purchase

• Case clearance and available height for a 90 mm cooler
• Processor TDP—ensure the CPU does not exceed 110 W under typical use
• Compatibility with your motherboard socket (Intel and AMD socket lists)
• The level of cooling required for gaming or heavy multitasking

Recommendations

For best results, use the VERKHO2 in systems with moderate thermal load, ensure good case airflow, and set the motherboard fan profile to allow the fan to scale between 800 and 2000 RPM according to CPU temperature. Replace thermal paste every couple of years or when removing the cooler to maintain efficient heat transfer.