HDMI kábel LANBERG CA-HDMI-30CC-0030-BK 3 m HDMI Type-A konektor samec–samec 48 Gbit/s HDMI 2.1

The Lanberg CA-HDMI-30CC-0030-BK is a 3 m HDMI Type A male‑to‑male cable supporting the HDMI 2.1 (Ultra High Speed) specification with Ethernet and a maximum data bandwidth of 48 Gbit/s. It features gold‑plated connectors, a 6.3 mm outer diameter and compatibility with modern video and audio features including eARC and Dolby Vision; with DSC (Display Stream Compression) it can support resolutions up to 10K-equivalent.

Advantages

This HDMI cable provides support for HDMI 2.1 features such as VRR, QMS, QFT and ALLM, plus HDR10+ compatibility. Gold-plated HDMI Type A connectors improve contact reliability and reduce corrosion. With a 48 Gbit/s bandwidth and DSC 1.2 support, the cable enables high-resolution video at high refresh rates for TVs, monitors and gaming consoles while maintaining a flexible 3 m length for typical home and office setups.

Suitable for

• Connecting 4K/8K TVs to set-top boxes, Blu-ray players or media streamers
• Linking gaming consoles and gaming PCs to displays supporting high refresh rates
• Connecting projectors and monitors in home theater or small meeting-room setups
• Audio systems using eARC-enabled TVs and receivers

Key specifications

• Connectors: 19-pin HDMI-A male to 19-pin HDMI-A male
• HDMI specification: Ultra High Speed with Ethernet (HDMI 2.1)
• Maximum bandwidth: up to 48 Gbit/s
• Support: DSC 1.2 (Display Stream Compression)
• Maximum resolutions without DSC: 7680×4320 @ 30 Hz; 5120×2880 @ 60 Hz; 3840×2160 @ 144 Hz
• Maximum resolutions with DSC: 7680×4320 @ 60 Hz; 5120×2880 @ 120 Hz; 3840×2160 @ 240 Hz
• Supported features: eARC, Dolby Vision, VRR, QMS, QFT, ALLM, HDR10+
• Cable outer diameter: 6.3 mm
• Colour: black
• Length: 3 m

How to use

Connect one HDMI Type A male end to the HDMI output of your source device (for example a console, PC, Blu‑ray player or set‑top box) and the other end to the HDMI input of your display or AV receiver. Ensure both devices support the intended HDMI features (for example eARC or VRR) and set the display/input settings as required. For highest supported resolutions and refresh rates, enable DSC and compatible display modes in the connected devices' settings.

Recommendations

For reliable performance, avoid tight bends near the connectors and keep the cable away from strong electromagnetic sources. Use the cable length appropriate to your setup (3 m) to minimise signal path and maintain recommended device firmware and HDMI settings for feature compatibility.