Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

Filament PC/PBT (HT-UV-IMPACT) čierny 1 kg Rosa3D

Filament PC/PBT (HT-UV-IMPACT) čierny 1 kg Rosa3D
Filament PC/PBT (HT-UV-IMPACT) čierny 1 kg Rosa3D
54,14 €
PDF
PDF
Sklad Nie je skladomNie je skladom Kód 4422256 Model PC/PBT-BLA-175-1-RO Záruka 2 roky

Doprava a vrátenie tovaru

Popis

PC/PBT (HT-UV-IMPACT) is a filament for industrial and automotive applications.

The material has been modified for impact strength and heat resistance, and infused with an anti-UV stabiliser.

The addition of polybutylene terephthalate (PBT) to Polycarbonate means less deformation on 3D printed parts than with pure PC.

The material is easier to print than PC and most common PC/ABS blends, does not emit unpleasant odours during printing, has relatively low shrinkage for this group of materials (up to 1%) and very good adhesion to the table.

Its excellent mechanical properties, very good impact strength and resilience, combined with the ability to be used outdoors (UV resistant) and the possibility of operating at relatively high temperatures (90-110C), make it an excellent construction material with a wide range of applications.

Both in terms of impact strength and temperature resistance, the material performs better than the popular PET-G and ABS, while it is easier to print than PC and PC-ABS.

Recommended printing parameters

  • Extrusion temperature: 240-260°C
  • Bed temperature: 90-110°C
  • Chamber temperature: 50-80°C
  • Air supply: 0-20% (depends on model geometry)
  • Compatible worktables: glass, smooth PEI, textured PEI
  • The filament can be printed on both direct and Bowden feed printers.
  • We recommend closing the chamber.

If there are problems with adhesion, we recommend using adhesion formulations.

Due to the high printing temperatures, it will be necessary to fit a full-metal heatbreak (without the Teflon tube inside).

Product parameters

  • Color: black
  • Diameter: 1.75 mm
  • Weight: 1000 g (vacuum packed)
  • Density: 1.20 g/cm3
  • Odor: odourless
  • Vicat softening point: 120°C (50N, 50°C/h)
  • Diameter tolerance: +/- 0.05
  • Oval tolerance: +/- 0.02

Parametre

Parametre
EAN
5907753132130
Farba produktu
Čierna
Kategória
Filamenty pre 3D tlačiarne
Materiál
Polykarbonát
Model
PC/PBT-BLA-175-1-RO
MPN
PC/PBT-BLA-175-1-RO
Značka
Rosa3D
Vývoj ceny za posledných 6 mesiacov
Filament PC/PBT (HT-UV-IMPACT) čierny 1 kg Rosa3D
Aktuálna
54,14 €
Najnižšia 7 d.
53,39 €
Najvyššia 7 d.
54,14 €
Zmena za 24 h
+0,75 €   +1%
Zmena za 7 d.
—   
Zmena za 30 d.
—   

Napísať recenziu

Hodnotenie *
Vaše meno sa zobrazí verejne – môžete použiť prezývku. Kupujúcich pozývame, aby písali recenzie; pred zverejnením ich kontrolujeme a zverejňujeme aj kritické.

Rovnaká séria a alternatívy

12

Populárne produkty v tejto kategórii

8
Predajca: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · IČO 303192950 · IČ DPH LT100008198612 · Odoslanie z EÚ (Litva)
WhatsApp
Messenger
Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.
Všetky kategórie