Polmask PLA 3D tlačový filament 1,75 mm Lava Red 1 kg

Polmask PLA 3D printing filament 1.75 mm Lava Red 1 kg is a bioplastic filament formulated for desktop FDM/FFF printers. The 1.75 mm diameter filament is supplied on a 1 kg spool in a vivid lava red color and is intended for general-purpose 3D printing where PLA’s dimensional stability, low warping and ease of use are priorities. This filament prints reliably on many consumer printers and is suitable for prototyping, visual models and decorative or static functional parts.

Advantages

This PLA filament offers good layer adhesion, predictable dimensional accuracy and reduced tendency to warp compared with more temperature-sensitive materials. The 1.75 mm diameter provides consistent feeding in most common extruders, and the 1 kg spool gives an adequate supply for medium-sized projects. The lava red color provides high visual contrast and consistent color reproduction across printed parts.

Suitable for

• Prototyping and concept models
• Scale models and figurines
• Decorative objects and household items
• Educational and hobbyist printing
• Static functional parts where PLA mechanical properties are acceptable

Key specifications

• Material: Polylactic Acid (PLA) bioplastic
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg filament mass
• Color: Lava Red
• Compatibility: Desktop FDM/FFF 3D printers with 1.75 mm filament
• Typical print bed: may print without heated bed on many printers; heated bed recommended for improved adhesion

How to use

Load the filament into the printer according to the printer manufacturer’s instructions. Recommended nozzle temperatures for PLA typically range from 190–220 °C; start near the middle of that range and adjust based on flow and layer adhesion. If prints show poor first-layer adhesion, use a heated bed set to a low temperature (40–60 °C), a build surface adhesive or blue painter’s tape. Calibrate filament diameter and extrusion multiplier in slicer settings for best dimensional accuracy.

Recommendations

Store filament in a dry environment and, if possible, in sealed packaging with desiccant to prevent moisture uptake which can cause bubbling and reduced print quality. For detailed print settings, perform small calibration prints to fine-tune nozzle temperature, print speed and retraction for your specific printer and hotend configuration.