Predlžovacia zásuvková lišta Kerg SMART M02728 – 3 AC zásuvky Typ F, 4 USB (1×USB-C + 3×USB-A), 1,5 m kábel, 16 A/250 V

Kerg SMART M02728 is a compact indoor power strip that combines three Type F AC outlets with four USB charging ports (one USB‑C and three USB‑A). It is housed in a plastic enclosure, includes an onboard on/off switch and is supplied with a 1.5 m mains cable suitable for typical home and office installations. The unit is rated for 230 V ~ 50 Hz operation with a maximum current of 16 A and provides USB charging at 5 V/2.4 A per port.

Advantages

The power strip offers multiple charging and power options in a small footprint, allowing simultaneous connection of several devices via AC sockets and USB ports. With a dedicated USB‑C port plus three USB‑A ports, it supports modern and legacy device charging. The integrated on/off switch adds convenient control while the 1.5 m cable length provides flexible placement within indoor environments.

Suitable for

• Charging smartphones, tablets and small USB devices
• Powering laptops and home office equipment via Type F AC outlets
• Use on desks, bedside tables or other indoor locations
• Connecting multiple peripherals in small workspaces

Key specifications

• AC outlet type: Type F, quantity 3
• USB ports: 4 (1× USB‑C, 3× USB‑A)
• USB output: 5 V, 2.4 A per USB port
• AC input voltage/frequency: 230 V ~ 50 Hz
• Maximum current: 16 A
• Cable length: 1.5 m (H05VV‑F, 3×1.5 mm²)
• Housing material: plastic
• Dimensions (W×H×D): 80 × 77 × 80 mm
• Weight: 400 g
• Placement: indoor use

How to use

Place the power strip on a stable indoor surface and plug the mains cable into a compatible Type F wall outlet. Connect AC devices to the Type F sockets and plug USB cables into the USB‑C or USB‑A ports as required. Use the onboard on/off switch to control power to connected devices. Ensure the combined load does not exceed the rated maximum current of 16 A.

Recommendations

For safe operation, avoid exposure to moisture, do not use the unit outdoors, and do not overload the power strip. Distribute high‑power loads across sockets and disconnect the strip if you notice unusual heat or odors.