RUKO KES Form C 90° 8,3 mm zástrčka magnetického ventilu, 2+PE, PG7, 250V/10A, čierna

The RUKO KES-FormC-90°-8,3mm is a solenoid valve connector built to the EN 175301-803 Form C standard, formerly DIN 43650 Form C. Its 90° cable outlet and PG7 gland suit tight machine layouts where a straight connector would obstruct adjacent components.

Highlights

• 2 poles + protective earth, 8 mm pin spacing
• Rated for 250 V AC/DC and 10 A
• Silver-plated copper alloy contacts with screw terminals
• Polyamide housing, black, with NBR gasket
• Accepts cable diameter up to 6.5 mm via PG7 gland

In daily use

The angled body routes the cable parallel to the valve surface, reducing strain and saving space. Screw terminals allow fast wiring without special tools, and the IP65 rating is maintained when the connector is properly mated and the gland tightened.

Full specifications

• Connector type: Solenoid valve connector, Form C
• Standard: EN 175301-803 Form C (DIN 43650 Form C)
• Number of poles: 2 + PE
• Cable outlet angle: 90°
• Cable gland size: PG7
• Rated voltage: 250 V AC/DC
• Rated current: 10 A
• Contact material: Copper alloy, silver-plated
• Housing material: Polyamide (PA)
• Protection rating: IP65 (mated and properly assembled)
• Operating temperature range: -40°C to +90°C
• Termination method: Screw terminals
• Max. cable diameter: 6.5 mm
• Gasket material: NBR
• Mounting type: Cable mount
• Approvals: VDE, UL, CSA
• Colour: Black
• Insulation resistance: > 10^9 Ohm
• Contact resistance: < 10 mOhm
• Pin spacing: 8 mm

Final note

The RUKO KES-FormC-90°-8,3mm is a robust, industry-standard connector for solenoid valves in automation and fluid control systems.