Vzduchový chladič Thermaltake UX200 SE 12 cm biely 800-1800 ot/min

Thermaltake UX200 SE ARGB Lighting CPU Cooler White is a 120 mm air cooler designed for reliable CPU cooling and visual customization. It features a white finish, a 120 mm fan with 800–1800 RPM speed range, U-shaped copper heat pipes and an aluminum heatsink to move heat away from the processor. Built-in addressable ARGB LEDs (15 high-lumen LEDs, 16.8 million colors) provide vibrant lighting effects and support synchronization with compatible motherboard RGB software.

Advantages

The UX200 SE White combines a high-volume airflow fan and U-shaped copper heat pipes to deliver steady heat dissipation across various orientations. The hydraulic bearing reduces operational noise and extends fan life through self-lubrication and a seal cap that prevents lubricant leakage. Integrated 5V addressable RGB lighting delivers extensive color options and can be controlled directly through major motherboard RGB ecosystems.

Suitable for

• Desktop PC builders seeking a compact 120 mm air cooler with ARGB lighting
• Systems using Intel and AMD sockets listed for broad compatibility
• Quiet or RGB-focused builds where moderate cooling (up to 170 W TDP) and visual synchronization are required

Key specifications

• Type: Air cooler
• Fan diameter: 120 mm
• Fan speed: 800–1800 RPM
• Max air pressure: 1.47 mmH2O
• Thermal Design Power (TDP): 170 W
• Supported sockets: Intel LGA 1700 / 1200 / 115x / 1366 and AMD AM4 / AM3 / AM3+ / AM2 / AM2+ / FM1 / FM2 (see product compatibility list)
• Lighting: 15 addressable ARGB LEDs (5V, 16.8 million colors), motherboard-sync compatible (ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome)
• Colour: White
• Manufacturer part number (MPN): CL-P116-AL12SW-A
• EAN: 4713227538329

How to use

Install the UX200 SE White using the included all-in-one backplate and mounting kit compatible with the supported Intel and AMD sockets. Attach the cooler to the CPU following the torque and orientation instructions from the motherboard or cooler manual, connect the 4-pin fan header to the motherboard for fan control, and plug the 3-pin or 4-pin ARGB cable into a 5V addressable RGB header to enable lighting synchronization with supported motherboard software.

Recommendations

Ensure the cooler is mounted on a clean CPU surface with an appropriate amount of thermal paste. Use motherboard fan control or BIOS settings to configure fan curves for a balance between noise and cooling performance. Connect the ARGB cable only to a 5V addressable RGB header to avoid damage to the lighting system.