Audio kábel ShiverPeaks 30771-1.5 — 3,5 mm stereo na 2 Cinch (1,5 m)

ShiverPeaks 30771-1.5 is a 1.5 m audio cable with a 3.5 mm stereo male plug on one end and two RCA (Cinch) male plugs on the other. It is intended for transmitting standard analog stereo signals between portable devices and home audio equipment. The cable allows connection of phones, tablets, laptops and portable music players to AV receivers, amplifiers, powered speakers or any device with RCA line inputs for straightforward playback and line-level audio routing.

Advantages

The cable provides a simple, low-latency analog connection for stereo audio with a length suitable for typical home and desktop setups. Metal-plated connectors ensure consistent contact and reduce oxidation risk, while the flexible insulated jacket supports easy cable routing and placement. Construction is aimed at reliable signal transfer for music playback and basic audio linking without the need for adapters or active conversion.

Suitable for

• Connecting smartphones, tablets or laptops to AV receivers or powered speakers
• Linking portable media players to stereo amplifiers
• Feeding line-level inputs on home audio systems and mixers
• Temporary or semi-permanent desktop and living-room audio setups

Key specifications

• Connector A: 3.5 mm stereo male (TRS)
• Connector B: two RCA (Cinch) male
• Cable length: 1.5 m
• Signal type: analog stereo line-level
• Suitable impedance: standard consumer line-level systems
• Sheath: flexible insulated jacket for indoor use

How to use

Insert the 3.5 mm stereo plug into the headphone or line output of the source device. Connect the left and right RCA plugs to the corresponding left (white) and right (red) line inputs on the target device. Set the source and recipient devices to appropriate volume or input modes before playback. When disconnecting, pull the connector housings rather than the cable to avoid strain on terminations.

Recommendations

For best performance, keep cable runs away from mains power and large electronic transformers to reduce potential interference. Use moderate length runs and secure loose sections to avoid mechanical stress on connectors. If using with mobile devices, reduce source volume before connecting to prevent sudden loud output at the receiving device.