Autostartér Lokithor AW401 2500A, powerbanka 20000mAh

Lokithor AW401 is a 5-in-1 automotive portable device combining a jump starter, powerbank, tire inflator, cordless pressure washer and flashlight. With a 20,000mAh (74Wh) battery and a 12V jump-start function, the unit is intended for starting vehicles with depleted batteries and for providing portable power and utility functions during travel or roadside use.

Advantages

The AW401 offers a peak starting current of 2500A and a rated starting current of 1500A, enabling starts for gasoline engines up to 8.5L and diesel engines up to 6.5L. The built-in 20,000mAh battery supports USB-C fast charging up to 60W and charges the device in approximately 1.6 hours. It also integrates a tire inflator with 10–150psi range and automatic shut-off, a cordless pressure washer with up to 1.5MPa pressure and 7–9L/min flow, and a 500lm flashlight with three light modes. In standby, the jump starter retains charge for up to 30 months.

Suitable for

• Emergency engine starts and roadside assistance
• Charging phones, tablets and laptops via USB-C (60W)
• Inflating car, bicycle tires and sports balls
• Washing a car or cleaning equipment where no mains power is available
• Providing portable light for repairs or signaling (Constant, Strobe, SOS)

Key specifications

• Brand: Lokithor; Model: AW401
• Battery capacity: 20,000mAh (74Wh)
• Starting voltage: 12V; Starting current: 1500A; Peak current: 2500A
• Compatibility: Gasoline up to 8.5L, Diesel up to 6.5L
• Jump starter operating temperature: -20°C to 50°C; Standby retention: up to 30 months
• Car pump pressure range: 10–150PSI; Sensor accuracy: ±2PSI; Air flow: 35L/min
• Pressure washer: max 1.5MPa; Water flow: 7–9L/min; Max suction lift: 5m; Self-suction height: 3m
• USB-A output: up to 5V/3A, 9V/2A, 12V/1.5A (18W max)
• USB-C output/input: up to 5–20V/3A (60W max)
• DC output: 12–16.8V / 10A (max); DC input: 12V/5A (60W max)
• Flashlight brightness: 500lm; Flashlight runtime: up to 24 hours

How to use

Ensure the AW401 is charged before use. To jump-start a vehicle, connect the LO-CLAMP-Pro clamps to the vehicle battery following the user manual safety instructions, then power the unit and start the engine. To use as a powerbank, connect devices to the USB-C or USB-A ports; the USB-C port supports fast charging up to 60W. For tire inflation, attach the correct inflator accessory, set the desired unit (bar/psi) and target pressure; the device can measure tire pressure and stop automatically when the set pressure is reached. For pressure washing, connect the water inlet and the supplied accessories, prime the unit if required and operate within the specified temperature and lift limits. Use the flashlight modes for illumination or signaling as needed.

Recommendations

Store the AW401 in a dry place and maintain charge according to the manual. Observe the specified temperature ranges for charging and operation, verify correct clamp polarity before jump-starting, and use only the supplied accessories to connect water and air fittings to ensure safe and reliable operation.