Čerpadlo Einhell GE-DP 900 Cut 900 W

The Einhell GE-DP 900 Cut 900 W is a submersible dirty-water pump designed for heavy-duty removal of contaminated water. With a 900 W motor and a maximum flow rate of up to 16,000 litres per hour and a delivery head of up to 11.5 m, it is suitable for dewatering basements, building pits, pools, garden ponds, cisterns and rainwater tanks. The pump housing is made of die-cast aluminium and cast iron and the unit includes a cutting mechanism and a 2" hose connection for large-diameter hoses. The float switch has stepless height adjustment and the pump is supplied with a 10 m cable.

Advantages

The integrated cutting mechanism reduces the size of solid contents and coarse dirt to prevent blockages. A robust housing of die-cast aluminium and cast iron and a double mechanical seal extend service life under demanding conditions. The 2" side hose connection allows fitting of large-diameter hoses for faster removal, while an ergonomically positioned carry-handle ensures comfortable transport. The stepless float switch enables automatic on/off switching at a set water level.

Suitable for (tasks / use cases)

• Dewatering flooded basements and building pits
• Emptying and cleaning garden ponds and pools
• Draining cisterns, wells and large rainwater barrels
• Handling heavily contaminated water with solid particles

Key specifications

• Power: 900 W
• Maximum flow rate: up to 16,000 L/h
• Maximum delivery head: up to 11.5 m
• Hose connection: 2" (side)
• Housing materials: die-cast aluminium and cast iron
• Float switch: stepless, adjustable
• Cable length: 10 m
• Operating voltage: 220–240 V AC
• Maximum liquid temperature: up to 35 °C
• Weight: 12.8 kg

How to use

Position the pump in the area to be dewatered on a stable surface or suspend it using the carry-handle as appropriate. Connect a suitably sized 2" hose to the side connection and route the discharge to a safe drainage point. Set the float switch height to the desired activation level for automatic operation or use manual control where required. Ensure the power supply matches the rating (220–240 V) and that the pump is fully submerged before switching on. After use, disconnect power, drain remaining water from the pump and clean the cutting mechanism if necessary.

Recommendations

For prolonged service life, avoid pumping liquids hotter than 35 °C and remove large, sharp objects before pumping when possible. Regularly inspect the cutting mechanism, seals and housing for wear and clean the pump after use to prevent accumulation of debris.