CPU chladič PCCOOLER GI-H58UR 120 mm ventilátor, až do 1800 ot/min, vežový chladič

PCCOOLER GI-H58UR is a tower-style CPU cooler equipped with a 120 mm fan capable of up to 1800 RPM. Designed for desktop processors, the cooler delivers directed airflow through a fin stack to dissipate heat from the CPU heatsink. Its compact tower profile fits standard PC cases and is intended for everyday computing and light to moderate processing loads where efficient, space-conscious cooling is required.

Advantages

The cooler combines a 120 mm fan with a tower heatsink to provide a balance of airflow and thermal contact area while maintaining a compact height. Fan speed up to 1800 RPM enables increased airflow when needed, and the tower design offers effective heat dissipation across multiple heat-conducting fins. The overall construction is optimized for compatibility with common motherboard layouts and RAM modules in standard ATX and micro-ATX builds.

Suitable for

• Office and home desktop PCs performing everyday tasks
• Compact builds that require a low-profile tower cooler
• Systems under light to moderate CPU load such as web browsing, media playback, and productivity applications
• Upgrades from stock coolers to improve temperature stability

Key specifications

• Cooling type: tower-style air cooler with single fan
• Fan diameter: 120 mm
• Maximum fan speed: up to 1800 RPM
• Airflow: designed for directed airflow through fin stack (manufacturer rating for airflow depends on fan speed)
• Noise characteristics: tuned for a balance between cooling performance and acoustic output at typical fan speeds
• Compatibility: intended for standard desktop CPU sockets (check motherboard layout and cooler clearance before installation)
• Form factor: compact tower suitable for ATX and micro-ATX cases with standard cooler clearance

How to use

Prior to installation, power down the computer and disconnect it from the mains. Remove the case side panel and locate the CPU socket area. Clean the CPU heatspreader surface and apply a thin, even layer of thermal paste if the cooler does not include pre-applied paste. Mount the cooler according to the included mounting hardware and instructions, ensuring the base makes full contact with the CPU. Secure the heatsink brackets and attach the 120 mm fan to the fin stack using the supplied clips or screws. Connect the fan cable to the appropriate CPU fan header on the motherboard and verify clearance with RAM modules and case panels. After reassembling the case, power on the system and confirm the fan operates and CPU temperatures are within expected ranges during idle and load conditions.

Recommendations

For reliable performance, ensure the cooler is installed with sufficient clearance from tall RAM modules and case components. Regularly clean dust from the fan and fin stack to maintain airflow; use compressed air or a soft brush while the system is powered off. Monitor fan speed and CPU temperatures via motherboard utilities to adjust fan curves if quieter operation or more aggressive cooling is desired.