CPU chladič Silentware Titan RGB Dual-Tower so 6 heatpipe a 2×120 mm PWM A-RGB ventilátormi

Silentware Titan RGB Dual-Tower with 6 heatpipes and 2×120mm PWM A-RGB fans is a high-capacity air cooler for desktop CPUs. The cooler uses a dual-tower heatsink layout with six direct-contact heatpipes to transfer thermal energy from the CPU to two stacked fin arrays. Two 120 mm PWM-controlled A-RGB fans provide variable airflow across the fins and offer addressable RGB illumination that can be synchronized with compatible motherboard software. The design balances cooling performance and acoustic control for workstations and gaming systems that require sustained heat dissipation.

Advantages

The dual-tower architecture increases fin surface area and improves heat spread compared with single-tower designs, while six heatpipes accelerate heat transfer from the CPU base to the fins. PWM fan control enables automatic speed adjustment according to CPU temperature, helping to maintain a compromise between cooling efficiency and noise levels. The included A-RGB lighting offers customizable illumination without affecting thermal performance, and the two-fan configuration enhances airflow and static pressure through the heatsink stacks.

Suitable for

• High-performance desktop CPUs under sustained load
• Gaming PCs where thermal management and visual customization are required
• Workstations used for content creation, rendering, or compilation tasks
• Systems where a balance of cooling capacity and moderate acoustic output is desired

Key specifications

• Cooling layout: dual-tower heatsink with two stacked fin arrays
• Heatpipes: six direct-contact heatpipes for heat transfer
• Fans: two 120 mm PWM-controlled A-RGB fans for airflow and lighting
• Fan control: PWM for automatic speed regulation based on system signals
• Lighting: addressable RGB (A-RGB) compatible with motherboard sync solutions
• Mounting: universal multi-socket mounting bracket for mainstream desktop CPU sockets

How to use

Install the Silentware Titan RGB following the motherboard and case manufacturer guidelines to ensure sufficient clearance for RAM modules and case dimensions. Secure the mounting bracket to the motherboard backplate, apply a thin, even layer of CPU thermal paste, and seat the cooler so the heatpipe base contacts the CPU integrated heat spreader. Connect the two fan power cables to the CPU fan and optional chassis fan headers with PWM support, and attach the A-RGB connectors to a compatible header or controller for lighting control. Verify that fans spin and lighting responds before closing the case.

Recommendations

For best results, check case clearance for the dual-tower height and confirm RAM module compatibility with the cooler orientation. Use motherboard fan curve settings or a fan controller to set appropriate PWM profiles that balance temperature and noise. Clean dust from the fin arrays and fans periodically to maintain optimal thermal performance and ensure A-RGB headers or controllers are compatible with your system for full lighting control.