Displex (10H) pancierová ochranná fólia e.v.i. pre Apple iPhone 16e/17e — odolná proti poškriabaniu, nečistotám a nárazom, transparentná

Real Glass (2D) with EASY-ON® MountMaster

Tempered glass with rounded edges
All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.
Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.

Case-friendly
Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone. In addition, the protective film is ultra-thin at 0,3mm. This means that all standard-sized protective cases can be used with the screen protection glass. Thus, your smartphone is optimally protected all around by a combined protection of the Displex Tempered Glass and your favourite case.

Anti fingerprint coating
The top layer of our 4-Layer Technology is a high-tech plasma coating. With an extremely long-lasting effect, this coating effectively repels fingerprints. In addition, the plasma coating guarantees a soft scrolling experience. This technology not only makes your display look better, but it also keeps it cleaner and therefore requires less frequent cleaning.

High-tech splinter protection
The high-tech shatter protection integrated in the Real Glass from Displex guarantees absolute safety even if the protective glass breaks. Thanks to the composite material of the second layer in the protective glass, it does not shatter and thus guarantees absolutely safe use. If the worst should come to the worst and the protective glass has absorbed a blow, fall or impact and is broken, the Displex protective glass can be easily pulled off the display in one piece thanks to the integrated high-tech shatter protection.

High-performance adhesive
Once the protective glass has been fitted, the high-performance adhesive ensures optimum adhesion properties and a clear look. The adhesive is adapted to all display coatings of the various manufacturers so that the protective film for mobile phones holds reliably in the long term. The visual appearance is not affected either: despite the screen protection film, you can enjoy gripping videos and photos with maximum transparency and colour fidelity.

Apply your screen protector with the EASY-ON® MountMaster
The screen protector comes pre-mounted, so you simply place the applicator onto your smartphone and pull the tab. Within seconds, the tempered glass is applied bubble-free, dust-free, and perfectly aligned.
The EASY-ON® MountMaster ensures everything stays in place: no misalignment and no blocked speaker or microphone openings. The result: a precise, fast, and professional installation—with zero hassle.

How to use

Clean the display thoroughly, position the EASY-ON® MountMaster applicator on the smartphone, then remove the protective film by pulling the tab. The pre-mounted tempered glass aligns itself and adheres smoothly to the screen, producing a bubble-free, dust-free result within seconds. If removal is needed after impact, peel the protector off in one piece thanks to the integrated splinter protection.

Recommendations

For best results, remove dust with the included wipe and dust sticker before applying, place the MountMaster accurately over the device, and avoid lifting the protector once applied to maintain adhesion and clarity.