Ethernetový kábel ProXtend CAT6 RJ-45 U/UTP 15M biely

The ProXtend CAT6 U/UTP CU LSZH Ethernet Cable (15 m) with RJ-45 connectors is designed for reliable Gigabit networks. Constructed with 99.9% pure copper strands (AWG 24) and U/UTP cabling, the cable supports 10/100/1000Base-T(X) data rates up to 1000 Mbit/s and is compatible with PoE+ devices. Its white LSZH outer jacket reduces smoke and toxic fumes in case of fire, while strain relief and a snagless latch protect the connector during installation.

Advantages

The cable uses 99.9% pure copper conductors and AWG 24 sizing to maintain signal integrity and reduce attenuation over the 15 m length. LSZH jacket material limits smoke and corrosive gases in hazardous conditions. Connectors feature 50µ"U" gold plating for improved contact durability and transmission quality compared with standard metal contacts. The reinforced strain relief and snagless design simplify handling and reduce connector damage during repeated use.

Suitable for

• Home networking (wired internet connections)
• Office LAN wiring and workstations
• Connecting switches, routers, and PoE+ powered devices
• Structured cabling where LSZH materials are required

Key specifications

• Cable type: CAT6 U/UTP CU
• Length: 15 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Conductor material: 99.9% pure copper, AWG 24
• Outer jacket: LSZH (Low Smoke Zero Halogen)
• Connector plating: 50µ"U" gold
• Colour: White
• PoE support: PoE+
• Weight: 0.59 kg

How to use

Route the Ethernet cable between devices so the RJ-45 connectors reach their ports without excessive bending; maintain the minimum bend radius recommended for structured cabling. Insert RJ-45 plugs firmly into device ports until the latch clicks. Use the snagless latch protection to avoid catching on patch panels or cable organizers. For permanent installations, secure the cable with appropriate clips or cable ties, avoiding over-compression of the jacket.

Recommendations

For best performance, use this CAT6 cable for Gigabit connections up to 15 m and verify that connected devices and network equipment support 1000Base-T and PoE+ if powering devices through the cable. Avoid running Ethernet cables parallel to high-voltage power lines to minimize interference.