HDMI kábel LogiLink CHA0100 1 m HDMI Type-A samec 2.0 18 Gbit/s

The LogiLink CHA0100 is a 1 m HDMI High Speed with Ethernet cable with HDMI Type A male connectors, supporting HDMI 2.0 and a data transfer rate up to 18 Gbit/s. It transmits audio, video and network data, supports resolutions up to 4K at 60 Hz (3840 x 2160), 3D and the Audio Return Channel (ARC). The cable is available in grey and black and is intended for connecting TVs, monitors, players and other HDMI-equipped devices.

Advantages

Gold-plated HDMI Type A connectors ensure reliable contact and reduced corrosion. HDMI 2.0 compliance and an 18 Gbit/s bandwidth enable high-resolution video and multi-channel audio transmission. Integrated Ethernet channel and ARC support simplify connections between compatible devices without separate network or audio cabling.

Suitable for

• Connecting 4K/60 Hz TVs and monitors to media players, set-top boxes or PCs
• Transmitting 3D video signals between compatible devices
• Using ARC to send audio from a TV to a soundbar or AV receiver
• Shared Ethernet over HDMI between compatible devices

Key specifications

• Length: 1 m
• Connectors: HDMI Type A (male) – both ends
• HDMI version: 2.0
• Bandwidth: up to 18 Gbit/s
• Supported resolution: up to 4K @ 60 Hz (3840 x 2160)
• Features: 3D, Audio Return Channel (ARC), Ethernet
• Colours: grey, black

How to use

Plug one HDMI Type A connector into the HDMI output of your source device (for example a Blu-ray player, game console or PC) and the other connector into the HDMI input on your display (TV or monitor) or AV receiver. Ensure both devices are powered on and set the display to the correct HDMI input. If using ARC or Ethernet over HDMI, enable the corresponding settings in the connected devices' menus where required.

Recommendations

For optimal signal quality, avoid sharp bends and tight loops in the cable and keep cable length appropriate for the installation. Use the HDMI 2.0 settings on both source and display to achieve 4K@60 Hz; check device compatibility for ARC and Ethernet functions.