Inter-Tech ST-7215 interný Ethernet 10000 Mbit/s káblové pripojenie

The Inter-Tech ST-7215 Internal Ethernet 10000 Mbit/s Wired Connectivity is an internal network adapter designed to provide high-speed wired connectivity for desktop systems and network appliances. With support for up to 10 Gbit/s throughput, this card is intended for environments that require reliable, low-latency data transmission. The internal form factor allows installation directly into compatible motherboard expansion slots to add or upgrade wired network capability.

Advantages

This internal Ethernet adapter offers consistent 10 Gbit/s wired data transfer, reducing bottlenecks in bandwidth-intensive tasks. Its wired connectivity design provides stable links with lower jitter and latency compared with wireless alternatives, and the internal installation preserves external port space and cabling neatness. The device is suitable for high-throughput network segments, enabling efficient file transfers, backups, and real-time data flows.

Suitable for

• Desktop computers requiring a 10 Gbit/s wired network interface
• Workstations handling large file transfers or media production
• Small office servers and NAS units needing high-throughput connectivity
• Network appliances or routers that accept internal expansion network cards

Key specifications

• Topology: internal PCIe expansion network adapter (internal form factor)
• Maximum data rate: up to 10,000 Mbit/s (10 Gbit/s)
• Connectivity type: wired Ethernet
• Primary use: high-speed wired network interface for data-intensive applications
• Installation: internal mounting into compatible expansion slot

How to use

Install the adapter into a compatible internal expansion slot on a powered-off computer following the motherboard manufacturer’s guidance. Secure the card, connect a suitable Ethernet cable to a matching 10 Gbit/s-capable switch or router, and power on the system. Install or verify appropriate drivers in the operating system to enable full 10 Gbit/s operation and configure network settings such as IP addressing, MTU size, and link aggregation as required by your network environment.

Recommendations

For consistent 10 Gbit/s performance, use certified Cat6a/Cat7 cabling or fiber connections where supported, and ensure connected switches or routers also support 10 Gbit/s speeds. Maintain proper airflow inside the chassis to avoid thermal throttling and keep firmware and driver software up to date for best compatibility and stability.