Interná sieťová karta DeLOCK 90758 10000 Mbit/s PCI Express káblová

The DeLOCK 90758 internal network card provides a PCI Express wired Ethernet interface delivering up to 10 Gbps over standard Cat.6 or Cat.6A copper cables. The card supports NBASE-T technology to enable intermediate speeds of 2.5 Gbps and 5 Gbps when a full 10 Gbps link is not achievable with the existing cabling. It is designed as an internal component for PCs to improve wired network performance using the PCI Express host interface.

Advantages

This PCI Express Ethernet card supports multiple link speeds (10 Gbps, 5 Gbps, 2.5 Gbps and 1 Gbps) and is backward compatible with Fast Ethernet standards, allowing flexible deployment on existing Cat.6/Cat.6A cable infrastructure. The NBASE-T capability provides higher-than-gigabit throughput without requiring immediate cabling upgrades. The card conforms to IEEE 802.1Q networking standards and is supplied in stainless steel and black finish suitable for internal PC installation.

Suitable for

Key specifications

How to use

Power off the PC and open the case following the manufacturer’s safety instructions. Insert the DeLOCK 90758 into an available PCI Express slot and secure the card to the chassis. Close the case and power on the system. Install drivers provided by the operating system or the manufacturer if required. Connect a Cat.6 or Cat.6A copper cable from the network card’s RJ‑45 port to a compatible switch or router. The card will negotiate the highest available speed (10 Gbps, 5 Gbps, 2.5 Gbps, or 1 Gbps) depending on the network equipment and cable quality.

Recommendations

For reliable 10 Gbps operation use certified Cat.6A cabling and a 10 Gbps-capable switch. For 2.5 Gbps or 5 Gbps links, ensure connected network equipment supports NBASE-T. Keep system drivers up to date to maintain compatibility and performance.