Koaxiálny kábel ShiverPeaks RG6U 1.0/4.8 — SAT-Quattro Double, model 81300-100-96DALUSPSTAKU

ShiverPeaks RG6U 1.0/4.8 — SAT-Quattro Double, model 81300-100-96DALUSPSTAKU is a coaxial cable designed for SAT-Quattro satellite installations and general RF signal transmission. The cable follows RG6U impedance characteristics with a 1.0 mm conductor and 4.8 mm dielectric dimensions, and is suitable for indoor and outdoor runs when used with compatible connectors and splitters. Its construction targets reliable signal distribution for satellite TV, cable TV and broadband RF links where a SAT-Quattro configuration is required.

Advantages

The cable features double shielding with a CCS combination that provides high attenuation rejection, helping to maintain signal integrity in environments with potential electromagnetic interference. Its RG6U geometry delivers consistent impedance for minimal return loss across typical satellite and cable frequency bands. The reel length and robust sheathing allow for flexible installation in both indoor risers and sheltered outdoor routes, while maintaining mechanical durability for standard residential and light-commercial use.

Suitable for

• SAT-Quattro satellite multiswitch installations
• Distribution of satellite TV signals to multiple tuners
• Cable TV and broadband RF links where RG6U geometry is required
• Indoor cabling and protected outdoor runs with appropriate connectors

Key specifications

• Cable type: RG6U coaxial
• Conductor diameter: 1.0 mm
• Dielectric diameter: 4.8 mm
• Shielding: double shield (CCS) with high attenuation rejection
• Suitable frequency range: satellite and cable TV bands (typical RF ranges)
• Installation length: reel format suitable for runs up to 100 m
• Application: indoor and sheltered outdoor use with compatible connectors

How to use

Prepare cable ends by stripping the outer jacket, shielding and dielectric to expose the conductor according to the connector manufacturer's instructions. Use connectors rated for RG6U geometry and ensure proper crimping or compression to maintain electrical contact and shielding continuity. For SAT-Quattro installations, route each cable to the corresponding multiswitch input or outlet, verifying polarity and connector tightness. Test signal levels and quality with a meter after installation and seal outdoor terminations with weatherproofing materials.

Recommendations

For optimal performance, use connectors and splitters specified for RG6U cables and SAT-Quattro systems, avoid sharp bends that reduce shielding effectiveness, and maintain separation from high-voltage power lines. When using outdoors, protect terminations from moisture and UV exposure; perform signal tests after completing the run to confirm acceptable levels before finalizing installation.