Materiál pre 3D tlač Creality 3D 3301010126 kyselina polymliečna PLA žltá 1 kg 1,75 mm

Creality 3D 3301010126 Polylactic acid (PLA) filament in yellow is a 1 kg, 1.75 mm thermoplastic spool designed for fused filament fabrication (FFF) 3D printers. The filament is intended for general-purpose printing where dimensional stability, ease of use and good surface finish are required. It is supplied by Creality and is certified with MSDS, REACH and RoHS, which indicates conformity with common safety and environmental standards for consumer 3D printing materials.

Advantages

This PLA filament offers predictable extrusion behavior and low warping, making it suitable for prints that require fine detail and consistent layer adhesion. The 1.75 mm diameter provides wide compatibility with consumer and prosumer 3D printers that accept this filament size. Certified compliance (MSDS, REACH, RoHS) supports safer handling and reduced environmental concerns compared with some other materials.

Suitable for

• Prototyping small to medium-size parts with good surface detail
• Educational projects and desktop 3D printing workshops
• Cosmetic models, display pieces and decorative objects
• Parts that do not require high temperature resistance or mechanical flexibility

When it may not be suitable

PLA is a bio-based thermoplastic with relatively low glass transition temperature and limited heat resistance. It may deform if exposed to sustained temperatures above about 50–60 °C, so it is not recommended for functional parts that will be used near heat sources or outdoors in hot climates. Additionally, PLA has lower impact resistance compared with engineering plastics, so it is not ideal for high-stress mechanical components.

Key specifications

• Material: Polylactic acid (PLA)
• Color: Yellow
• Net weight: 1 kg
• Filament diameter: 1.75 mm
• Form: Spool for FFF/FDM 3D printers
• Certifications: MSDS, REACH, RoHS

How to use

Load the 1.75 mm PLA filament into a compatible 3D printer following the printer manufacturer’s filament-loading procedure. Typical print temperature settings for PLA are 190–220 °C; begin in the middle of this range and adjust by ±5–10 °C according to nozzle size, print speed and desired surface finish. A heated bed is optional but can be set to 40–60 °C to improve first-layer adhesion. Use standard layer heights and moderate cooling to achieve crisp detail; increase part cooling for overhangs and bridges. Store the spool in a dry environment or sealed container with desiccant to prevent moisture uptake which can cause printing defects.

What to consider before purchase

• Confirm printer compatibility with 1.75 mm filament diameter
• Verify that PLA’s thermal and mechanical properties meet your application needs
• Consider spool storage conditions to avoid moisture absorption
• Check required filament length or weight to ensure sufficient material for your prints

Recommendations

For best results with Creality 3D 3301010126 PLA Yellow, start with a nozzle temperature around 200 °C and a print speed of 40–60 mm/s, enable part cooling for detail, and store unused filament in a resealable bag with desiccant. Use a clean glass or PEI build surface and calibrate your first layer for consistent adhesion.