Microconnect B-FTP615 sieťový kábel sivý 15 m Cat6 F/UTP (FTP)

The Microconnect B-FTP615 is a 15 m Cat6 networking cable with RJ-45 connectors designed for reliable high-speed data transfer up to 10000 Mbit/s. The cable conforms to Cat6 performance up to 250 MHz and features F/UTP (foil screened, overall braided) shielding to reduce electromagnetic interference (EMI). It is grey, has latch protection on the connectors to prevent damage during installation in tight spaces, and is backwards compatible with Cat5e and Cat5 infrastructures.

Advantages

Shielding (F/UTP) minimises EMI and crosstalk, improving signal integrity and reducing transmission errors. Tested to Cat6 standard (up to 250 MHz), the cable supports modern high-speed networks while remaining compatible with older Cat5e/Cat5 systems. Integrated latch protection on RJ-45 plugs prevents connector damage during installation. The 15 m length provides flexibility for home and small office setups.

Suitable for

• Connecting switches, routers or modems to patch panels, keystone jacks or wall outlets
• Home and small office wired networks
• Streaming and entertainment setups requiring stable wired connections
• Environments where EMI reduction is important (near electrical equipment)

Key specifications

• Brand: MicroConnect
• Model: B-FTP615
• Category: Cat6 (tested up to 250 MHz)
• Length: 15 m
• Connectors: RJ-45 to RJ-45 with latch protection
• Shielding: F/UTP (foil screened)
• Maximum data rate: up to 10000 Mbit/s (dependent on network equipment)
• Colour: Grey
• Compatible with: Cat5e, Cat5

How to use

Plug each RJ-45 connector into the corresponding network ports on your devices (switch, router, modem) or into wall outlets and patch panels. Ensure connectors click into place via the latch protection. For optimal performance, avoid sharp bends and excessive tension on the cable and keep the cable run away from heavy sources of interference when possible. Verify network settings on connected equipment to match the intended speed and duplex settings.

Recommendations

Use this shielded Cat6 cable for installations where EMI may affect performance, for permanent wired connections in homes or small offices, and where a 15 m length provides the required reach. Test connections after installation to confirm expected speeds and stability.