Microconnect B-UTP60025 sieťový kábel sivý 0,25 m Cat6 U/UTP (UTP)

The Microconnect B-UTP60025 is a 0.25 m Cat6 networking cable with RJ-45 connectors designed for connecting devices such as switches, modems or routers to each other or to structured cabling via patch panels, keystone jacks or wall outlets. The cable meets Cat6 requirements and is tested up to 250 MHz, while remaining backward compatible with Cat5e and Cat5. Its U/UTP construction reduces electromagnetic interference and the grey jacket provides a neutral appearance.

Advantages

This Cat6 cable supports high data transfer rates (up to 10000 Mbit/s according to product data) and is suitable for small office, home network and entertainment applications. It is manufactured with latch protection on the RJ-45 plugs to reduce the risk of connector damage during installation in tight spaces. Backwards compatibility with Cat5e and Cat5 ensures interoperability with existing infrastructure.

Suitable for

• Connecting switches, routers and modems over short distances
• Patching into patch panels, keystone jacks or wall outlets
• Small office and home network setups
• Audio/video and entertainment network connections

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Length: 0.25 m
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Data rate: up to 10000 Mbit/s (product data)
• Colour: Grey
• Weight: 0.006 kg
• Brand / MPN / EAN: MicroConnect / B-UTP60025 / 5704174126874

How to use

Plug one RJ-45 connector into the network device (switch, modem or router) and the other into the destination device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks into place. Route the cable to avoid sharp bends and keep it away from strong sources of electromagnetic interference. For structured cabling, connect to the appropriate keystone jack or patch panel port following your site’s wiring labeling.

Recommendations

Use this short 0.25 m Cat6 patch cable for close device connections where cable length should be minimal. Avoid excessive bending and pulling; store unused cables coiled without tight loops to preserve integrity.