Napájací kábel SATA HDD DeLOCK 60103 2x 4-Pin konektor samec/konektor samica 0,165 m

The DeLOCK Power Cable SATA HDD (0.165 m) converts a SATA 15-pin power connector to two 4-pin Molex (IDE) connectors, allowing SATA drives to be powered from Molex/ATX power sources. It includes an additional 4-pin (5.25") female connector so the original ATX/Molex power path can be preserved for powering IDE devices.

Advantages

This compact 0.165 m cable provides a simple, space-saving way to adapt Molex power outputs to SATA power requirements. The cable supports simultaneous connection of two Molex-powered devices and retains the original ATX/Molex female passthrough connector for compatibility with legacy IDE drives. Its standardized SATA 15-pin and 4-pin Molex connectors ensure compatibility with common PC internal power supplies and drives.

Suitable for

• Powering a SATA hard drive from a Molex (4-pin) power source
• Connecting SATA drives in systems with limited native SATA power connectors
• Maintaining power for IDE devices while adding SATA drives via the passthrough

Key specifications

• Brand: DELOCK
• Model / MPN: 60103
• EAN: 4043619601035
• Cable length: 0.165 m
• Connector 1: SATA 15-pin
• Connector 2: 2 x Molex (4-pin) + 4-pin (5.25") female passthrough

How to use

Connect the SATA 15-pin plug to the power input of the SATA drive. Attach one or both Molex (4-pin) plugs to the Molex power outputs from the power supply or use the 4-pin female passthrough to continue powering other IDE devices. Ensure connectors are properly aligned before applying power and route the cable to avoid obstructing fans or other components.

Recommendations

Use this adapter only with switched-off systems when connecting or disconnecting power. Check that the power supply provides sufficient amperage on the 5V and 12V rails for all connected drives. Avoid excessive bending or tension on the cable to preserve connector integrity.