Napájací kábel ShiverPeaks 09-06001 — euro konektor zahnutý na IEC 60320 C7, 1,5 m

ShiverPeaks Power Cable 09-06001 is a 1.5 m mains lead with an angled Euro plug to an IEC 60320 C7 connector. It is intended for powering small appliances and consumer electronics that use the two-pin C7 inlet. The angled Euro-style plug reduces protrusion from the wall socket, making the cable suitable for confined installation spaces and behind furniture. The cable length of 1.5 m provides moderate reach while keeping cable clutter manageable.

Advantages

The angled Euro plug enables a lower profile connection at the wall outlet, which helps when space is limited and reduces strain on the plug. The standard IEC 60320 C7 connector is compatible with a wide range of audio/video devices, chargers and other equipment. Constructed for mains use, the lead offers reliable power delivery for everyday electronic devices and a cord length that balances convenience and tidiness.

Suitable for

• Small audio/video equipment with a C7 inlet (portable radios, some DVD/Blu-ray players)
• Compact laptop power adapters and external chargers that accept a C7 connector
• Household chargers and adapters for consumer electronics
• Installations behind furniture or in tight spaces where an angled plug is advantageous

Key specifications

• Connector A: Angled Euro-style mains plug
• Connector B: IEC 60320 C7 (figure-8) connector
• Cable length: 1.5 m
• Intended use: Mains lead for consumer electronics and small appliances
• Design: Space-saving angled plug for reduced wall clearance

How to use

Insert the angled Euro plug into a compatible mains socket ensuring correct orientation and secure seating. Connect the IEC 60320 C7 connector to the device's C7 inlet until it is fully seated. Check that connections are firm and that the cable is routed to avoid sharp bends, pinch points or contact with heat sources. Disconnect by pulling the plug, not the cable, and switch off the mains supply before connecting or disconnecting if required by the device.

Recommendations

Use the cable only with devices specified to accept an IEC C7 connector and within the rated mains voltage of your region. Avoid running the cable under rugs or across walkways and inspect periodically for damage; replace the lead if the insulation or connectors show wear.