Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

Napájacia káblová sada 1 m 35 mm² pre meniče série IVT SWD 2000 W

Napájacia káblová sada 1 m 35 mm² pre meniče série IVT SWD 2000 W
Napájacia káblová sada 1 m 35 mm² pre meniče série IVT SWD 2000 W
63,24 €
Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W is a dedicated connection cable intended for use with IVT SWD 2000 W inverters. The set contains one meter of 35 mm² cross-section power cable designed for DC and AC connections between batteries, inverters and distribution components. Th... Čítať viac
Sklad 9 Kód 2245256 Značka IVT Model 431004 Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie streda, októbra 28
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W is a dedicated connection cable intended for use with IVT SWD 2000 W inverters. The set contains one meter of 35 mm² cross-section power cable designed for DC and AC connections between batteries, inverters and distribution components. The cable is sized to carry the currents typical for small off-grid systems and backup power installations and is suitable for short-distance installations where solid, low-resistance connections are required.

Advantages

The 35 mm² conductor cross-section provides low voltage drop and reliable current capacity for the rated inverter power. The one-meter length allows flexible placement of the inverter relative to batteries or distribution blocks without excess cable clutter. The cable construction is suitable for standard inverter terminals and ensures stable mechanical and electrical contact when properly terminated. Using a correctly sized cable reduces heating and energy losses compared with undersized wiring.

Suitable for

Key specifications

How to use

Strip the cable ends to the required length and apply appropriate lugs or ring terminals compatible with the inverter and battery terminals. Ensure terminals are clean and free of corrosion before assembling. Mount the cable so it follows the shortest practical route with secure fastening to avoid movement or chafing. Tighten terminal connections to the torque recommended by the inverter manufacturer and verify polarity before energizing the system. After installation, inspect connections for heat buildup during initial operation.

Recommendations

Use the cable only for the intended inverter and battery connections. Verify conductor size and length against the installation’s current requirements and local electrical regulations. If longer runs or different environmental conditions are required, select cables and terminations rated for those conditions and consult a qualified installer when in doubt.

Hlavné vlastnosti
  • DC connection between battery bank and IVT SWD series 2000 W inverter
  • AC output wiring to nearby distribution or fused shunts in small systems
  • Backup power setups and portable inverter installations
  • Short interconnect runs where 35 mm² conductor is required for current capacity
  • Conductor cross-section: 35 mm²
  • Length: 1 m
  • Intended use: power cable for inverter DC/AC connections
  • Compatible with IVT SWD series 2000 W inverter terminals
  • Designed for low voltage drop and high current capacity in short runs
Parametre
Dĺžka kábla
1 m
Farba produktu
White
Vývoj ceny za posledných 6 mesiacov
Napájacia káblová sada 1 m 35 mm² pre meniče série IVT SWD 2000 W
Aktuálna
63,24 €
Najnižšia
62,50 €
Najvyššia
63,37 €
Zmena za 24 h
+0,74 €   +1%
Týždeň
-0,13 €   0%
Mesiac
+0,05 €   +0%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.