Nástenná kotva Fischer 26424 skrutkovacia kotva 15 mm

The Fischer 26424 screw anchor 15 mm is a wall plug designed for secure fastening in solid masonry such as brick and concrete. With a 15 mm length and requirement for a 5 mm drill hole, this anchor provides a compact solution where shallow embedment is needed. Supplied in packs of 100, it is intended for repeated use across multiple fixtures and installations where a reliable, non-expanding anchor is suitable.

Advantages

The screw anchor offers a consistent fitting depth and predictable load distribution in brick and concrete substrates. Its short 15 mm length allows use in thin walls or near-edge fixings while still delivering stable anchorage when the correct drill diameter and minimum hole depth are used. Packed in larger quantities, the product supports efficient work on larger jobs and reduces interruptions for replenishment.

Suitable for

• Fixing light fittings and brackets to solid brick walls
• Mounting small shelves, hooks, and cable clips in concrete
• Indoor installations where shallow embedment is required
• Commercial or construction projects requiring bulk quantities

Key specifications

• Anchor length: 15 mm
• Recommended drill hole diameter: 5 mm
• Minimum drill hole depth: 20 mm
• Suitable base materials: solid brick and concrete
• Pack quantity: 100 pieces

How to use

Drill a clean, properly sized hole with a 5 mm masonry bit to at least 20 mm depth. Remove dust from the hole before inserting the wall plug so it seats fully and flush with the surface. Insert the corresponding screw for the anchor size and tighten until the fixture is secure; avoid over-torquing to prevent damage to the substrate or anchor. For repeat installations, inspect each hole and plug for correct seating and replace any damaged anchors.

Recommendations

Use the Fischer screw anchor in solid masonry only; do not use in hollow blocks or soft plaster without verifying suitability. Select screws that match the anchor diameter and intended load, and follow standard safety practices when drilling and fixing to ensure secure, long-lasting installations.