Solárny systém Offgridtec® MobileBlack L 150W pre obytné vozidlá, 30A MPPT DUO regulátor nabíjania, OLP PERC solárny modul

Due to the high module efficiency, this system is particularly suitable for vehicles where comparatively little space is available to achieve the greatest possible yield.

150Wp nominal power, 620Wh daily yield, expandable by 1 identical solar module

Modern MPPT dual charge controller from Offgridtec® with auxiliary charging output and AES switching output

All mounting accessories and extensive information material (instructions) included

The Offgridtec® MobileBlack series impresses with an attractive visual design in elegant black and its extremely convincing performance parameters. Starting with the OLP solar modules in the latest shingle construction and an outstanding cell efficiency of over 22%, up to the Offgridtec® MPPT Pro Duo charge controller, one can really speak of a successful selection and product composition from Offgridtec.

• 150W MobileBlack L Caravan complete system

This complete system contains everything you need to charge your batteries on the go. The dual controller included in the set enables, in addition to charging your house battery, also the simultaneous charging of the starter battery, as it has a corresponding auxiliary charging output. Included in the scope of delivery is extensive information material, in which the setup and connection are explained step by step – this applies to both the technical connection and the bonding of the mounting spoilers and the roof feedthrough. This roof feedthrough is probably one of the most critical points, as this is where the transition into the interior of the motorhome takes place. The feedthrough is made of the same material as the spoilers – the PEG screw connection corresponds to protection class IP68 and is therefore absolutely waterproof when installed correctly.

Scope of delivery of the MobileBlack L 150W Caravan solar system

1x Offgridtec® OLP solar module 150W V2 PERC with shingle technology - 018480

1x Offgridtec ABS cable feedthrough 1-way – black with waterproof PEG screw connection

1x Offgridtec 68cm ABS mounting profiles (1 pair) - for fastening the solar modules in black

1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan version

1x Offgridtec 1.5m 10mm² battery connection cable with MIDI fuse holder - connection cable solar charge controller to battery M8 cable lug connection

1x Offgridtec® 30A MPPT Dual solar charge controller with auxiliary charging and AES switching output

• 1x Remote display for MPPT Pro Duo charge controller

1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator adhesion promoter, cleaning cloth and operating instructions

1x MC-4 extension cable 50cm for connecting a connection cable on the module to the module connection cable

• 1x Battery terminal set
• 1x MIDI fuse 40A 58V

The Offgridtec® MPPT Pro Duo 30A solar charge controller

The MPPT Pro Duo controller can handle a maximum charging current of 30A. This means that this system can theoretically be expanded to almost 400W of solar module power - taking into account the module selection (expansion only with identical panels), an expansion by a maximum of 1 module would probably make the most sense for this system. In addition, the device has an auxiliary charging output via which the starter battery can be charged in parallel to the house battery during longer standstill times – a feature that is certainly appreciated in a mobile home. So that one can speak of the optimum in terms of efficiency, the device also has an AES switching output – this enables automatic switching of refrigerators with "AES" from gas to 12V operation when there is excess solar power.

• Maximum charging current 30A – 390W module power theoretically usable
• 30A load output for 12V consumers directly on the charge controller

The clear remote display enables mounting of the controller in hard-to-reach places in the vehicle without restricting operation and overview of the system parameters

• AES control signal for auto-refrigerator to avoid energy waste
• 100V maximum PV input voltage

Digital circuit control of the adaptive three-stage charging mode to improve battery life

Support for all important battery types (lead-acid, AGM, GEL, LiFePo4)

The 150W V2 OLP solar module with the latest shingle technology

The 150W V2 OLP solar module with PERC technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), as well as with the high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.

The professional solar mounting system

Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to clean fastening of the solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed design of the spoilers, no branches or similar can get caught under the solar modules.

The bonding

A properly executed bonding is superior to any screw connection in tough motorhome or boat use. On painted or GRP surfaces, a strength of over 4 N/mm2 can be achieved, which, calculated on the adhesive surface, would be a value that could never be achieved with a screw connection into the thin aluminum or GRP carrier layer. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective surface.

The Dekalin adhesive set contains all components necessary for even the self-installer to create a professional connection. Stainless steel screws for fastening the solar modules are included as well as detailed bonding instructions. In addition, you only need a standard hand lever press for cartridges and a lint-free cloth.

The ABS mounting profiles

Cable feedthroughs from the roof into the interior are always quite tricky, as it must be ensured that everything remains absolutely tight even after years.

Because even the smallest water ingress can cause often irreparable damage to the interior insulation and furnishings. Especially since moisture is often noticed quite late. They are extremely stable and absolutely walkable. The feedthroughs are bonded with the adhesive set that you also use for gluing the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be mounted.

The professional wiring set

All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the MC-4 connectors.

1x Offgridtec 012877 Offgridtec® MobileBlack L 150W 12V MPPT Caravan solar system