Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m

Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
70,53 €
The BlueOptics LCP-1250RJ3SR-L-BO 100m is an SFP-class fiber optic transceiver module engineered for short-range high-speed data links. Housed in an aluminium enclosure and weighing approximately 20 grams, this compact module supports data transmission up to 100 meters and follows industry MSA form-... Čítať viac
Sklad 521 Kód 1475563 Značka BLUEOPTICS Model LCP-1250RJ3SR-L-BO Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie štvrtok, októbra 22
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

The BlueOptics LCP-1250RJ3SR-L-BO 100m is an SFP-class fiber optic transceiver module engineered for short-range high-speed data links. Housed in an aluminium enclosure and weighing approximately 20 grams, this compact module supports data transmission up to 100 meters and follows industry MSA form-factor and interface expectations for SFP devices. It is intended for integration into networking equipment that accepts SFP transceivers and provides a reliable physical layer for gigabit Ethernet links.

Advantages

The module provides a standardized SFP interface for easy hot-plug installation and broad interoperability with SFP-capable switches, routers and network appliances. Its aluminium housing offers mechanical robustness and thermal stability while keeping weight low. Designed for short-reach gigabit links, the transceiver supports stable data throughput over distances up to 100 meters and is compatible with typical twisted-pair and fiber infrastructure when used in supported configurations.

Suitable for (tasks / use cases)

Key specifications

How to use

Install the transceiver by inserting it into a compatible SFP slot on the network device until it clicks into place; ensure the host device supports the module. Connect the appropriate cable (copper or fiber as required by your hardware and the module’s supported media) between devices. After insertion the host will typically enumerate the module and establish link parameters automatically; verify link status via the host device management interface. For removal, follow hot-swap procedures recommended by the equipment manufacturer and carefully extract the module by the release mechanism.

Recommendations

Use the BlueOptics LCP-1250RJ3SR-L-BO in compatible SFP ports and verify firmware/driver compatibility with your network equipment. Keep protective caps on the optical connectors when not in use, avoid mechanical stress on cables and maintain ambient operating conditions within the equipment specifications for reliable performance.

Hlavné vlastnosti
  • Short-range gigabit Ethernet connections within racks and between adjacent network cabinets
  • Replacement or expansion of SFP ports in switches, routers and storage systems
  • Edge and access network links where compact, hot-pluggable transceivers are required
  • Test setups and lab environments requiring reliable 100 m optical/electrical links
  • Interface type: SFP form factor
  • Maximum transmission distance: up to 100 meters
  • Data rate class: suitable for gigabit Ethernet (1.25 Gbit/s signalling)
  • Material and finish: aluminium housing
  • Weight: approx. 0.02 kg
Parametre
Ethernet LAN
Yes
Farba produktu
Aluminium
Hmotnosť
0.02 kg
Hmotnosť balenia
30 g
Maximálna prenosová vzdialenosť
100 m
Množstvo v balení
1 pc(s)
Prevádzková teplota (T-T)
0 - 70
Typ rozhrania
SFP
Typ rozhrania Ethernet
1.25 Gigabit Ethernet
Typ SFP transceivera
Fiber optic
Záručná doba
5 year(s)
Vývoj ceny za posledných 6 mesiacov
Optický transceiver modul BlueOptics LCP-1250RJ3SR-L-BO 100m
Aktuálna
70,53 €
Najnižšia
69,61 €
Najvyššia
75,43 €
Zmena za 24 h
+0,82 €   +1%
Týždeň
+0,48 €   +1%
Mesiac
-1,21 €   -2%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.