Pamäťový modul G.Skill DDR3 8 GB 1600 MHz 2x4 GB

The G.Skill DDR3 8GB 1600MHz 2x4GB SO-DIMM kit provides 8 GB of laptop memory in a dual-channel configuration with two 4 GB modules. Operating at 1600 MHz with CAS latency 9 and a low operating voltage of 1.35 V, this memory kit is designed to improve multitasking and overall system responsiveness in notebook computers while producing less heat and consuming less power.

Advantages

Low-voltage operation at 1.35 V reduces power consumption and heat generation compared with standard 1.5 V DDR3 modules, which can help extend battery life and improve thermal stability in laptops. The kit is validated through manufacturer burn-in testing to ensure stability and consistent performance. It is also backward-compatible with systems that accept DDR3 1.5 V SO-DIMM modules.

Suitable for

• Upgrading laptop memory for better multitasking
• Everyday computing: web browsing, office work, media playback
• Light to moderate multimedia editing and programming
• Replacing or matching existing SO-DIMM modules in notebooks

Key specifications

• Total capacity: 8 GB (2 × 4 GB)
• Memory type: DDR3 SO-DIMM
• Form factor: 204-pin SO-DIMM
• Frequency: 1600 MHz
• CAS latency: 9
• Operating voltage: 1.35 V (compatible with 1.5 V systems)

How to use

Power off the laptop and remove the battery if applicable. Open the memory access panel following the laptop manufacturer’s instructions, discharge static by touching a grounded metal object, and remove the existing SO-DIMM if necessary. Insert each 204-pin module into the SO-DIMM slot at an angle and press down gently until the retaining clips engage. Reassemble the laptop, reinstall the battery, and power on. Confirm the system recognizes the full 8 GB in the BIOS or operating system.

Recommendations

Install modules in matched pairs for dual-channel operation and consult your laptop manual to verify maximum supported memory and compatible slot configurations. If the system originally requires 1.5 V modules, test stability after installation; the 1.35 V modules are designed to be compatible but system behavior can vary.