Pamäťový modul G.Skill DDR3 8GB 1600MHz 2x4GB

The G.Skill DDR3 8GB 1600MHz kit consists of two 4GB 240-pin DIMM modules configured for dual-channel operation, providing a total of 8GB of system memory. Operating at 1600 MHz with CAS latency 9 and a standard 1.5 V operating voltage, this memory kit is suitable for mainstream desktop and workstation motherboards that support DDR3 DIMMs. Its form factor and electrical characteristics follow common DDR3 standards to ensure broad compatibility with legacy platforms.

Advantages

This G.Skill memory kit offers balanced performance for everyday computing and productivity tasks through its 1600 MHz clock and CL9 timing. The dual-module configuration enables dual-channel bandwidth on compatible motherboards, improving data transfer rates compared with single-module installs. The 240-pin DIMM design and standard 1.5 V voltage make installation straightforward on motherboards that support DDR3, and the two-module kit simplifies upgrades by providing matched pairs tested for compatibility.

Suitable for

• Upgrading desktop PCs to improve multitasking and application responsiveness
• Office and productivity systems requiring stable memory performance
• Older workstations and home builds that use DDR3 240-pin DIMM slots
• Dual-channel motherboard configurations to maximize memory bandwidth

Key specifications

• Capacity: 8 GB (2 x 4 GB modules)
• Type: DDR3
• Clock speed: 1600 MHz
• CAS latency: CL9
• Form factor: 240-pin DIMM
• Operating voltage: 1.5 V

How to use

Power off the system and unplug it before installing memory. Open the PC case, locate the DDR3 240-pin DIMM slots on the motherboard, and consult the motherboard manual to identify the recommended slots for dual-channel installation. Insert each 4GB module into the corresponding slot, applying even pressure until the retention clips snap into place. After installation, close the case, reconnect power, and start the system. Verify that the BIOS/UEFI detects the full 8GB and that memory frequency and timings are set to the expected 1600 MHz CL9 or configured to auto-detect by the motherboard.

Recommendations

For best results, install both modules in the manufacturer-recommended slots to enable dual-channel mode. When mixing with existing memory, ensure matching DDR3 specifications (speed, voltage, and timings). Check the motherboard manual for maximum supported memory and BIOS updates that may improve compatibility with DDR3 modules.