Pamäťový modul G.Skill DDR3 8GB 1600MHz 2x4GB

G.Skill DDR3 8GB (2x4GB) kit, 1600 MHz (PC3-12800), 240-pin DIMM, 1.5 V. The dual-module kit provides 8 GB of DDR3 system memory in a dual-channel configuration suitable for desktop motherboards that support DDR3 DIMMs. It is optimized for standard 1600 MHz operation with CL11 timings and a 1.5 V supply.

Advantages

This G.Skill memory kit offers a simple upgrade path to increase system RAM capacity and enable dual-channel operation. The 240-pin DIMM form factor and standard 1.5 V voltage make it compatible with many DDR3-capable motherboards. With a rated frequency of 1600 MHz and CL11 timing, it balances performance and stability for everyday computing and light multitasking.

Suitable for

• Upgrading older desktop PCs that accept DDR3 240-pin DIMMs
• Increasing memory for office work and web browsing
• Light multitasking and general-purpose home use

Key specifications

• Brand: G.SKILL
• Model / MPN: F3-1600C11D-8GNS
• EAN: 4711148599634
• Capacity: 8 GB (2 × 4 GB)
• Type: DDR3, 240-pin DIMM
• Speed: 1600 MHz (PC3-12800)
• CAS Latency: CL11
• Voltage: 1.5 V

How to use

Power off the computer and disconnect it from the mains. Open the PC case, locate the memory slots on the motherboard and refer to the motherboard manual for the recommended slot population for dual-channel operation. Align the notch on each DIMM with the slot key, insert the modules evenly and press down until the retention clips engage. Close the case, reconnect power and start the system. Check BIOS/UEFI to ensure the modules are recognized and running at the expected frequency and timings.

Recommendations

Verify motherboard compatibility before installation: some Intel 4-series chipsets and very old systems may not support certain DDR3 kits or the specified timings. If needed, update the BIOS/UEFI and consult the motherboard documentation for supported memory specifications.