Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m

Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m
Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m
Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m
Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m
93,00 €
Singlemode fiber optic patchcord Extralink SC/UPC‑SC/UPC Drop, Simplemode G.652D Simplex 50 m is a 50‑metre simplex fiber cable with SC/UPC connectors on both ends, designed for drop connections in FTTH and LAN environments. The cable uses G.652D singlemode fiber to provide low attenuation and stabl... Čítať viac
Sklad Nie je skladomNie je skladom Kód 2367048 Značka EXTRALINK Model EX.18716 Záruka 2 roky

Doprava a vrátenie tovaru

Singlemode fiber optic patchcord Extralink SC/UPC‑SC/UPC Drop, Simplemode G.652D Simplex 50 m is a 50‑metre simplex fiber cable with SC/UPC connectors on both ends, designed for drop connections in FTTH and LAN environments. The cable uses G.652D singlemode fiber to provide low attenuation and stable singlemode transmission for linking optical equipment, patch panels and ONT/ONT ports. Its simplex construction and standardized SC/UPC connectors allow straightforward insertion into common fiber sockets and adapters.

Advantages

This Extralink SC/UPC patchcord offers consistent singlemode performance with low insertion loss and return loss characteristics typical of G.652D fiber. The SC/UPC connectors provide reliable mechanical coupling and easy handling in rack or wall‑mounted patch panels. The 50 m length supports flexible routing between equipment without additional splicing, while the simplex design simplifies port usage where only one fiber is required.

Suitable for

Key specifications

How to use

Connect one SC/UPC connector to the equipment or patch panel port and the other SC/UPC connector to the corresponding ONT, transceiver or adapter. Ensure connectors and adapters are clean before mating to avoid increased attenuation. Route the cable to avoid tight bends and mechanical stress; maintain the manufacturer’s recommended minimum bend radius for singlemode fiber to preserve optical performance. When removing the cable, pull on the connector body rather than the cable jacket to prevent damage.

Recommendations

For optimal performance, clean SC/UPC endfaces with an appropriate fiber cleaning tool before each connection and secure the cable along its route to prevent movement and bending near connector ends. Use this 50 m simplex patchcord where a single fiber strand is sufficient; for duplex requirements, use an appropriate duplex assembly. Store the cable coiled without sharp bends and protect connectors with dust caps when not in use.

Hlavné vlastnosti
  • FTTH drop connections between outside plant and customer ONT
  • Interconnections in LAN and telecom patch panels
  • Linking optical network terminals and media converters
  • Laboratory and testing setups requiring a 50 m singlemode lead
  • Fiber type: ITU‑T G.652D singlemode
  • Connector type: SC/UPC on both ends (simplex)
  • Configuration: Simplex
  • Length: 50 metres
  • Typical use: Drop cabling, patching and equipment interconnects
Parametre
Hmotnosť
0.75 kg
Vývoj ceny za posledných 6 mesiacov
Patch kábel Extralink SC/UPC‑SC/UPC Drop, Singlemode G.652D Simplex 50 m
Aktuálna
93,00 €
Najnižšia
11,28 €
Najvyššia
131,61 €
Zmena za 24 h
+1,26 €   +1%
Týždeň
+0,90 €   +1%
Mesiac
-0,06 €   0%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.