Patch kábel InLine Cat6 S/FTP PiMF RJ-45–RJ-45 250 MHz PVC fialový 1,5 m

InLine Cat6 S/FTP PiMF patch cable, 1.5 m, with RJ-45 plugs on both ends and a purple PVC jacket. The cable uses S/FTP (screened foil twisted pair) construction with pair‑in‑metal‑foil (PiMF) shielding around each pair to reduce crosstalk and electromagnetic interference. It is designed for Cat6 performance up to 250 MHz and is suitable for Gigabit Ethernet links in LAN, office and home network installations.

Advantages

The S/FTP PiMF design provides effective protection against alien crosstalk and external EMI, improving signal integrity for high‑speed data transmission. The 1.5 m length is convenient for patching between switches, patch panels and wall sockets without excessive slack. Fitted with standard RJ‑45 plugs on both ends, this Cat6 patch cord supports 1 Gbps connections and adheres to Category 6 performance up to 250 MHz. The purple PVC jacket makes cable identification easier in structured cabling environments.

Suitable for

• Connecting switches, routers and patch panels within LAN racks
• Home and office Gigabit Ethernet connections (1 Gbps)
• Patching between wall sockets and network devices
• Environments where reduced crosstalk and EMI are required

When it may not be suitable

This PVC‑jacketed cable is intended for indoor use and may not be suitable for outdoor or direct burial applications where UV resistance and weatherproofing are required. It is a Category 6 patch cord optimized for 250 MHz; for 10 Gbps links or higher transmission frequencies over longer distances you should consider Cat6a or Cat7 cables designed for those specifications.

Key specifications

• Cable category: Cat6
• Shielding: S/FTP with Pair‑in‑Metal‑Foil (PiMF)
• Maximum frequency: 250 MHz
• Maximum supported link speed: Gigabit Ethernet (1 Gbps)
• Connectors: RJ‑45 to RJ‑45
• Cable length: 1.5 m
• Jacket material: PVC
• Color: Purple

How to use

Insert each RJ‑45 plug into the corresponding network ports of your devices (switch, router, patch panel, or network card) until the plug clicks into place. Use the 1.5 m length for short connections inside racks, between devices on a desk, or from a wall outlet to a PC. Avoid tight bends near the connector and do not exceed the recommended bend radius to maintain performance. When disconnecting, depress the plug latch before pulling to prevent damage.

What to consider before purchase

• Intended application: indoor patching and short cable runs
• Required network speed: optimized for Gigabit (1 Gbps)
• Length needed: 1.5 m suits close device placement
• Environment: PVC jacket for indoor use, not UV/weather resistant

Recommendations

Use this InLine Cat6 S/FTP PiMF patch cable for reliable Gigabit connections in office and home networks where reduced crosstalk is important; label or group purple cables for easy identification in structured cabling.