Polymaker Panchroma Matte PLA filament 1,75 mm, 1 kg, farba Matte Lava Red (CA04021)

3D printing with standard PLA often results in visible layer lines and a glossy finish that can detract from the appearance of your models. The Polymaker Panchroma PLA Matte in Black solves this by delivering a smooth, matte surface that hides layer lines and gives your prints a professional, understated look.

Who is it for

This filament is ideal for makers, designers, and hobbyists who want high-quality prints with a refined matte finish without the need for post-processing. It works with most FDM 3D printers that accept 1.75mm filament.

Main features

• Matte surface finish reduces visibility of layer lines
• Consistent 1.75mm diameter with ±0.03mm tolerance
• Low odor during printing
• Tangle-free winding on a cardboard spool
• Net weight: 1 kg

Specifications

• Material: PLA (Polylactic Acid)
• Colour: Black
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.03 mm
• Net Filament Weight: 1 kg
• Recommended Nozzle Temperature: 190-220 °C
• Recommended Bed Temperature: 25-60 °C (or Off)
• Recommended Print Speed: 30-70 mm/s
• Density: 1.17 - 1.24 g/cm³
• Tensile Strength: 50-60 MPa
• Elongation at Break: 3-6%
• Heat Deflection Temperature (HDT): 55 °C (at 0.45 MPa)
• Spool Material: Cardboard
• Moisture Content: <0.05%

Tips

For best results, store the filament in a dry environment and use a nozzle temperature around 210°C. A heated bed is not strictly necessary, but if your printer has one, set it to 50°C for improved adhesion.