Priemyselný L3 managed switch PLANET IGS-6325-4T2X — 4× 2,5G RJ‑45, 2× SFP+, 9–48V DC, hliník/modrá

The PLANET IGS-6325-4T2X is an industrial Layer‑3 managed Ethernet switch that provides four 2.5G RJ‑45 copper ports and two 10G SFP+ fiber slots in a rugged aluminium/blue metal enclosure. The switch supports full‑duplex operation, an 8k MAC address table and a 60 Gbit/s switching capacity. Designed for industrial and outdoor‑adjacent environments, it accepts a wide 9–48 V DC input and is suitable for wall mounting. It supports a broad set of IEEE networking standards for compatibility with existing infrastructure and modern multi‑gigabit devices.

Advantages

The IGS-6325-4T2X delivers multi‑gigabit performance over existing Cat5e/Cat6 cabling through 2.5GBASE‑T ports while offering 10G SFP+ uplink options for longer distance or higher bandwidth links. It includes Layer‑3 routing (IPv4/IPv6) with RIP and OSPF, robust Layer‑2 features such as 802.1Q VLAN, Q‑in‑Q and MSTP, and enhanced security functions including SSHv2, TLSv1.2 and ACL enforcement. Industrial features include redundant ring protection (G.8032 ERPS), fast recovery, fault alarm, digital input/output for external alarms, and support for Modbus TCP for SCADA integration.

Suitable for / Use cases

• Industrial automation networks and factory floor Ethernet
• Telecom and carrier edge deployments requiring IEEE 1588 and synchronous Ethernet
• Multi‑tenant units, campus and enterprise networks needing QoS and traffic control
• Remote sites and outdoor cabinets with wide‑range DC power and wall‑mount needs
• Networks requiring secure management and monitoring (SSH, TLS, SNMPv3, SMTP alerts)

Key specifications

• Ports: 4 × 2.5G RJ‑45 (auto‑negotiation 2.5G/1G/100/10), 2 × 10G SFP+ slots
• Switching capacity: 60 Gbit/s
• MAC address table: 8k entries
• Power input: 9–48 V DC (redundant power support)
• Form factor and material: metal IP30 enclosure, wall‑mountable
• Operating temperature range: industrial range (manufacturer spec -40 to 75 °C)
• Network standards: IEEE 802.3ab/802.3z/802.3x/802.3bz/802.3ae/802.3ad/802.1x/802.1w/802.1s/802.1p/802.1ag/802.1Q/802.1D
• Layer support: Layer‑2 switching with Layer‑3 IPv4/IPv6 static routing, RIP, OSPF
• Security and management: SSHv2, TLSv1.2, SNMPv3, Web/Telnet/console management, ACL (L2–L4)
• Industrial features: G.8032 ERPS redundant ring, digital input/output, fault alarm, SMTP event alert
• Additional: SFP DDM support, Modbus TCP, IPv6/IPv4 dual stack, QoS and bandwidth control
• Colour: aluminium and blue
• Weight: 1.129 kg

How to use

Install the switch in a suitable wall‑mounted location with access to the DC power source in the 9–48 V range and connect copper or fiber links to the RJ‑45 and SFP+ ports respectively. Use the web‑based management interface for initial configuration or access the console/Telnet for text‑based setup. Configure VLANs, Layer‑3 routing (static, RIP or OSPF) and QoS policies according to network design. Enable security features such as SSHv2, TLSv1.2 and SNMPv3 and configure ACLs and 802.1X authentication for edge protection. Set up Modbus TCP and digital input/output alarms where integration with SCADA or external sensors is required.

Recommendations

For reliable operation in industrial environments, mount the switch on a stable surface away from direct exposure to liquids and excessive vibration, use certified SFP/SFP+ transceivers for the fiber links, and deploy redundant power feeds when possible. Regularly update firmware via the vendor channel and monitor events with SNMPv3 and SMTP alerts to detect and respond to faults promptly.