SATA kábel DeLOCK 85092 0,7 m SATA 7-pinový čierny modrý

The DeLOCK 85092 SATA cable is a 0.7 m internal cable for connecting SATA devices such as HDDs, controller cards or flash storage to motherboards or controllers. It supports the SATA III standard with a maximum data transfer rate of up to 6 Gb/s and is backward compatible with earlier SATA versions. The cable has a black and blue design and is intended for internal use where the connector on a hard drive is oriented downward when installed.

Advantages

The cable complies with the SATA III standard and delivers up to 6 Gb/s where supported. Metal clips on the connectors secure the connection and ensure the plug clicks into place. The 7-pin SATA connectors on both ends provide a universal fit for standard SATA devices. Backward compatibility allows use with older SATA ports at their respective speeds.

Suitable for

• Connecting 3.5" or 2.5" HDDs and SSDs to a motherboard
• Connecting SATA controller cards to drives
• Internal connections for flash memory adapters and optical drives

Key specifications

• Cable type: SATA III
• Cable length: 0.7 m
• Connectors: SATA 7-pin to SATA 7-pin
• Maximum data transfer rate: up to 6 Gb/s (SATA III)
• Product colour: Black, Blue

How to use

Power off the computer and disconnect from mains before installation. Orient the cable so that the drive-side connector is aligned to lead downward if required by the drive bay. Firmly insert the 7-pin SATA connectors into the drive and motherboard or controller until the metal clip clicks and secures the connection. Reconnect power and boot the system to verify that the drive is detected.

Recommendations

Use the cable for internal SATA connections only; avoid excessive bending or pinching of the cable. If used with older SATA ports, performance will be limited to the maximum supported by the older standard.