SATA kábel DeLOCK 85094 0,1 m SATA 7-pinový čierny modrý

This SATA cable by DeLOCK (model 85094) is a 0.1 m internal cable with SATA 7-pin connectors designed for connecting SATA devices such as HDDs, controller cards or flash memories. It supports the SATA III standard with data transfer rates up to 6 Gb/s and is backward compatible with earlier SATA versions, operating at the corresponding lower speeds when used with older devices. The cable has metal retention clips on the connectors and a black-and-blue colour scheme; when connected to a hard drive the cable is routed downwards.

Advantages

The cable supports SATA III (6 Gb/s) and is backwards compatible with previous SATA versions. Its short 0.1 m length is suitable for compact builds and reduces cable clutter. Metal clips on both 7-pin connectors provide a secure, audibly locking connection. The black and blue design helps with visual identification inside a chassis.

Suitable for

• Connecting 2.5" or 3.5" SATA HDDs and SSDs to a motherboard or controller
• Internal connections to RAID or controller cards
• Compact PC builds or systems with limited cable space

Key specifications

• Cable type: SATA III
• Cable length: 0.1 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s
• Colour: Black, Blue
• Manufacturer: DELOCK, MPN 85094

How to use

Align each 7-pin SATA connector with the corresponding SATA port on the drive and the motherboard or controller. Gently press the connector until the metal clip clicks into place to secure the connection. When connecting to a HDD, route the cable downwards as intended. Ensure the system is powered off before connecting or disconnecting internal cables to avoid data loss or hardware damage.

Recommendations

Use this short 0.1 m SATA cable for tight internal layouts where minimal cable length is required. For full 6 Gb/s performance, connect between SATA III-capable devices and ports; when used with older SATA revisions the achievable speed will be limited by the older device or port.