Sieťový kábel Digitus Cat6 UTP 30m

The DIGITUS Networking Cable Cat6 UTP 30m (DK-1611-300) is a 30-metre unshielded twisted pair cable designed for structured network connections that comply with Cat6 specifications. It features four pairs of 26 AWG (26/7) conductors in a twisted-pair configuration and RJ45 connectors on both ends. The cable is UL-listed and comes in grey color.

Advantages

The cable supports high-speed data transmission according to Cat6 standards and is suitable for Gigabit Ethernet. Boots with kink protection and strain relief increase connector durability. U/UTP construction offers consistent pair performance for reduced crosstalk, while the UL listing indicates compliance with safety standards.

Suitable for

• Ethernet networking up to Cat6 performance (Gigabit Ethernet)
• Patch panels and wall outlets in offices and homes
• Temporary or permanent horizontal cabling runs up to 30 metres
• Connecting switches, routers, computers and networked devices

Key specifications

• Length: 30 m
• Cable type: U/UTP (unshielded overall, twisted pairs)
• Conductors: 4 x 2 AWG 26/7 (twisted pairs)
• Connectors: 2 x RJ45
• Connector features: boots with kink protection and strain relief, spot length on boot
• Standards: Cat6
• Safety: UL-listed
• Colour: Grey
• Manufacturer: DIGITUS, MPN: DK-1611-300, EAN: 4016032214298

How to use

Uncoil the cable and route it along the intended path avoiding sharp bends and sources of electrical interference. Plug RJ45 connectors into the network ports of your devices until they click. Ensure the boots with strain relief seat properly against the device to prevent pulling of the connector. For fixed installations, secure the cable with appropriate clips or cable ties, leaving slack for service access.

Recommendations

For best performance, avoid running the cable parallel to power lines for long distances and maintain bend radii greater than the connector boots. Use this Cat6 UTP cable for network segments up to 30 m to preserve signal integrity and Gigabit speeds.