Silikónový tesniaci prostriedok Fischer 512208 sivý 310 ml

Fischer 512208 is a grey sanitary silicone sealant designed for corner, movement and connection joints in sanitary and kitchen areas. The product has 25% elasticity, provides powerful adhesion and high abrasion resistance, and is suitable for use on smooth substrates. Its skin-over time is approximately 10 minutes and it withstands temperatures from -40 °C to 180 °C. The cartridge contains 310 ml, and the minimum application temperature is 5 °C.

Advantages

The high-quality silicone formulation allows for easy application and smoothing, enabling efficient work on joints. With 25% movement accommodation, the sealant is suitable for high-stress expansion joints and provides long-lasting jointing. Very good adhesion on smooth surfaces helps prevent moisture ingress into the substrate, while high wear resistance and long-term mold protection maintain the integrity of the sealed surface during cleaning and regular use.

Suitable for

• Sealing corner and connection joints in bathrooms and kitchens
• Movement and expansion joints with high stress
• Sealing around sinks, bathtubs, showers and tiles

Key specifications

• Brand: FISCHER
• Model / MPN: 512208
• EAN: 4048962114980
• Colour: joint grey
• Volume: 310 ml
• Elasticity / movement capacity: 25%
• Skin-over time: approx. 10 minutes
• Application temperature: from 5 °C
• Service temperature range: -40 °C to 180 °C

How to use

Ensure surfaces are clean, dry and free of dust, grease and old sealant. Cut the cartridge tip to the required bead size and fit a compatible nozzle. Apply the silicone sealant evenly into the joint, maintaining continuous pressure on the cartridge. Smooth the joint within the skin-over time to achieve a neat finish. Allow full curing according to joint width and temperature before exposing the seal to water or mechanical stress.

Recommendations

Store the product frost-free and use at temperatures above 5 °C. For best results on non-porous or glossy surfaces, test adhesion first. Follow local regulations for mold-sensitive areas and allow sufficient cure time before cleaning or using the sealed area.