Vrták (do kladiva) Bosch SDS plus-8X Clean 8 mm 8x100x225 mm, model 2608901760

The Bosch SDS plus-8X Clean hammer drill bit, 8 mm diameter with overall length 225 mm and working length 100 mm, is designed for rotary‑percussion drilling in concrete and masonry. Its SDS‑plus shank ensures secure tool engagement and fast bit changes with compatible hammer drills. The design focuses on clean dust removal and precise hole placement for anchor and dowel installation during renovation and light construction tasks.

Advantages

The drill bit combines a hardened carbide tip with an optimized flute geometry to enhance dust extraction and reduce clogging during drilling. Its SDS‑plus shank provides reliable fit and torque transmission in rotary‑percussion tools. The 8 mm diameter and 100 mm working length are intended for common anchoring and fixing operations, delivering consistent hole accuracy and extended cutting performance under typical site conditions.

Suitable for

• Drilling holes for anchors and dowels in concrete and masonry
• Renovation and installation work requiring precise small‑diameter holes
• Use with SDS‑plus hammer drills for light to medium percussive drilling tasks

Key specifications

• Drill diameter: 8 mm
• Working length (effective drilling depth): 100 mm
• Overall length: 225 mm
• Shank type: SDS‑plus compatible
• Tip material: carbide cutting head for masonry
• Flute design: optimized for improved dust removal
• Intended drilling mode: rotary‑percussion (hammer drilling)

How to use

Install the SDS‑plus shank securely into the chuck of a compatible hammer drill following the drill manufacturer's instructions. Mark the drilling point and start at low speed to establish the hole, then apply steady pressure and use the hammer function for percussion drilling in concrete or masonry. Withdraw the bit occasionally to clear dust from the hole and to maintain drilling efficiency. After reaching the required depth, clean the hole before inserting anchors or dowels.

Recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and a dust mask when drilling. For best results, match the drilling mode and speed to the material and avoid excessive side pressure to prolong bit life. When drilling deep holes, periodically extract the bit to remove dust and avoid overheating. Ensure compatibility with SDS‑plus hammer drills before use.