Wolfcraft VLC 1000 hliník čierna 37 cm šírka rezu

The Wolfcraft VLC 1000 Aluminium Black 37 cm Cutting Width is a professional-grade vinyl and laminate cutter designed for precise, low-dust cuts on floor and design boards up to 14 mm thick and up to 370 mm wide. Its robust gear unit with threefold power transmission enables cutting of thick laminate, vinyl and design boards with clean edges while protecting decorative layers. A patented return mechanism resets the blade after each cut, supporting efficient workflow. The cutter is treated with an EDP coating to reduce adhesion on the blade and features serrated cutter bar and limit stop to hold the workpiece securely; non-slip cushion feet and a material support provide stability during operation.

Advantages

The VLC 1000 offers a high transmission gear unit for powerful cutting, a patented blade return for consistent operation and an EDP-coated blade that resists sticking. Its serrated cutter bar and adjustable 90° limit stop ensure stable, accurate cuts while non-slip feet keep the unit steady. The device minimises noise and dust, allowing on-site use in occupied environments. Multiple cutting gap settings accommodate a range of board thicknesses without the need for additional tools.

Suitable for

• Cutting vinyl tiles and click vinyl boards up to 6 mm thick
• Cutting laminate and design boards up to 14 mm thick
• On-site installation where low dust and noise are required
• Precision 90° cross cuts, angled cuts and rip cuts on panels 210–370 mm wide

Key specifications

• Brand: Wolfcraft
• Model: VLC 1000 (MPN 6940000, EAN 4006885694002)
• Maximum cutting width: 370 mm (37 cm)
• Supported material thickness: 2–14 mm (step-adjustable: step 1 = 2–4 mm, step 2 = 5–8 mm, step 3 = 9–11 mm, step 4 = 12–14 mm)
• Suitable for vinyl tiles and click vinyl up to 6 mm
• Material: aluminium components; EDP-coated blade
• Made in: European Union

How to use

Place the VLC 1000 on a stable, level surface and rest the panels on the material support. Adjust the cutting gap to the appropriate step for the board thickness (step 1 through 4). Position the panel against the adjustable 90° limit stop for square cuts; set the stop in one of four 40 mm increments to match widths from 210 to 370 mm. For angled cuts or rip cuts, adjust or remove the limit stop as required. Clamp particularly thick boards to the extra-wide cutter bar for additional hold, then make the cut by guiding the blade through the material. The patented return mechanism will move the blade back after the cut.

Recommendations

When working on-site or in occupied spaces, use the VLC 1000 to minimise dust and noise. Always select the correct cutting gap for the board thickness and secure the workpiece with the serrated cutter bar and limit stop. For best results on impact-insulated boards, use the smooth blade setting to avoid splintering and protect the decorative surface.