ACT modrý 1,5 metra U/UTP CAT6 patch kábel s ochranou jazýčka s RJ45 konektormi samec

The ACT Blue 1.5m U/UTP CAT6 Snagless RJ45 patch cable is a 1.5 meter network cable designed for reliable Ethernet connections in home and office environments. It features RJ45 connectors with a snagless boot, gold-plated contacts to reduce signal loss and corrosion, and a blue outer jacket for easy identification. The cable uses full copper conductors and meets ANSI/TIA-568-C2-1 performance requirements, providing stable high-speed data transfer and compatibility with Power over Ethernet (PoE) applications. The product also complies with CPR Euroclass Eca.

Advantages

The snagless RJ45 design prevents accidental clip damage when pulling the cable through conduits or patch panels. Gold-plated contacts improve signal integrity and resist oxidation, helping to maintain consistent data transmission. Full copper conductors provide lower resistance and better heat dissipation, which is important for PoE and sustained high-throughput operation. Compliance with recognized performance standards ensures predictable network behavior and interoperability with existing structured cabling systems.

Suitable for

• Connecting computers, switches and routers within LANs
• Patch panels and wall plates in small office and home networks
• PoE devices such as IP phones, access points and cameras
• Temporary cabling runs and permanent patch installations

Key specifications

• Cable category: CAT6 (U/UTP)
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45, snagless boots
• Conductor material: full copper conductors
• Contact plating: gold-plated contacts
• Color: Blue
• Standards: ANSI/TIA-568-C2-1 performance compliance
• CPR Euroclass: Eca

How to use

Insert each RJ45 connector firmly into the corresponding network port until the latch clicks. Route the cable to avoid sharp bends and tension; maintain a gentle bend radius to preserve signal integrity. When using patch panels or stacked equipment, press the snagless boot gently while inserting or removing the connector to avoid damaging the clip. For PoE devices, ensure both ends are connected to compatible PoE-capable switch or injector equipment to deliver power and data over the cable.

Recommendations

Use the ACT CAT6 patch cable for short to medium length connections where Category 6 performance is required. Avoid tightly bundling the cable with high-voltage power lines and keep it away from strong electromagnetic sources to minimize interference. For installations requiring fire performance beyond Euroclass Eca, select cables with a higher CPR rating. Regularly inspect connectors for debris and replace cables showing physical damage or degraded performance.