ACT Powercord napájací kábel CEE 7/7 konektor samec (rohový) - C19 zelený 0,6 m

The ACT Powercord CEE 7/7 male angled to C19 coupler is a 0.6 m mains cable designed for safe and compact power connections. Built for devices that accept a C19 inlet and for installations using a CEE 7/7 mains plug, this green angled cable supports a maximum input voltage of 230 V and a current rating of 16 A. The short length and angled CEE 7/7 plug make it suitable for tight spaces behind racks, cabinets, or equipment where a straight connector would be impractical.

Advantages

The cable combines a right-angled CEE 7/7 mains plug with a C19 coupler to reduce strain on the connector and wall outlet in confined areas. At 0.6 m length it minimizes cable clutter while keeping power routing tidy. The 16 A current rating and 230 V compatibility meet common mains requirements for professional IT and AV equipment. The green jacket improves cable identification in multi-cable installations.

Suitable for

• Connecting servers, UPS units or network equipment with a C19 inlet
• Powering devices in server racks and data center cabinets with limited rear clearance
• Workstations or AV cabinets where cable visibility and identification are important

Key specifications

• Cable length: 0.6 m
• Connector 1: CEE 7/7 angled mains plug
• Connector 2: C19 coupler
• Maximum input voltage: 230 V
• Maximum current: 16 A
• Product colour: Green

How to use

Inspect the cable for visible damage before use. Insert the angled CEE 7/7 plug into a compatible mains socket, ensuring the plug sits firmly and the orientation prevents stress on the cable. Connect the C19 coupler to the device inlet until it is fully seated. Ensure both ends are secure and route the cable to avoid sharp bends or pinch points. Do not exceed the specified voltage and current ratings.

Recommendations

Use this short angled power cord in locations with restricted clearance behind equipment to reduce connector stress and improve cable management. Avoid routing near heat sources, and periodically check connections for looseness or wear. For permanent installations, consider strain relief and proper routing to prevent accidental disconnection.