ACT sivý 2,5 metra U/UTP CAT6A patch kábel s ochranou západky a RJ45 konektormi

The ACT Grey 2.5m U/UTP CAT6A patch cable with snagless RJ45 connectors is a network connection cable designed for reliable high-speed data transmission. With a 2.5 meter length and U/UTP construction, the cable supports Gigabit Ethernet over 10/100/1000Base-T(X) networks and is finished in a neutral grey color. Gold-plated contacts on the RJ45 plugs provide consistent conductivity and wear resistance for frequent insertions and removals.

Advantages

The U/UTP CAT6A build reduces crosstalk and limits external electromagnetic interference without using individual pair shielding, keeping the cable flexible and straightforward to install. Snagless RJ45 boots protect the connector tab during routing and handling, preventing accidental disengagement. The 2.5 m length offers a balance between reach and cable management in home and office setups, while gold-plated contacts improve long-term signal integrity.

Suitable for

• Connecting desktop computers, laptops, and network switches in home or small office networks
• Linking routers, access points, and patch panels within structured cabling systems
• Temporary or permanent workstation cabling where a mid-length patch cable is required
• Environments that require reliable Gigabit Ethernet connections with straightforward installation

Key specifications

• Cable length: 2.5 m
• Cabling standard: CAT6A
• Shielding: U/UTP (unshielded overall, unshielded twisted pairs)
• Connector type: RJ45 to RJ45, snagless boots
• Supported speeds: 10/100/1000Base-T(X) (Gigabit Ethernet)
• Contact plating: gold-plated contacts
• Color: Grey

How to use

Plug one RJ45 connector into the Ethernet port of your device and the other into a router, switch, modem or wall outlet. Ensure the connector clicks into place to confirm a secure mechanical and electrical connection. Route the cable to avoid sharp bends, heavy compression or tight kinks; leave some slack to accommodate movement or equipment repositioning. For initial network configuration, verify link lights on both connected devices and confirm network settings on your devices as required by your network environment.

Recommendations

For best performance, avoid running the cable parallel and in close proximity to power cables or other sources of electromagnetic interference. Use cable ties or Velcro straps for tidy routing, and replace the cable if connectors show visible damage or if link stability degrades. Select the 2.5 m length to minimize excess cable while retaining enough reach for typical desk-to-equipment connections.