Adaptér ShiverPeaks 4‑pinový 3,5mm konektor samec na 2× 4‑pinový 3,5mm konektor samica, pozlátené kontakty, 0,2 m, biely

The Adapter ShiverPeaks 4‑pole 3.5mm plug to 2× 4‑pole 3.5mm jack, gold contacts, 0.2 m, white is a compact Y‑split cable that converts a single TRRS 3.5 mm male connection into two TRRS 3.5 mm female sockets. It provides a physical split of combined audio and microphone signals, enabling two compatible headsets or devices with TRRS jacks to be connected to one source. The cable is finished in white and uses gold‑plated contacts to maintain reliable signal transfer and reduce corrosion over time.

Advantages

The adapter supports four‑pole TRRS connections so both stereo audio and microphone lines are preserved when splitting a single connection into two. Gold‑plated contacts improve conductivity and resist oxidation, while the short 0.2 m length minimizes signal loss and keeps the connection neat and unobtrusive. The two female 3.5 mm sockets allow simultaneous connection of headsets or audio accessories without extra adapters.

Suitable for

• Sharing audio and microphone access from a smartphone, tablet or laptop with two headsets
• Connecting headsets with microphone and remote control functions to a single TRRS port
• Routing combined audio/microphone signals between devices that use 4‑pole 3.5 mm connectors

Key specifications

• Connector type: 4‑pole (TRRS) 3.5 mm male to 2 × 4‑pole (TRRS) 3.5 mm female
• Contact plating: gold‑plated contacts
• Cable length: 0.2 m
• Color: white
• Cable configuration: Y‑split audio/headset adapter preserving stereo and microphone lines

How to use

Insert the 4‑pole 3.5 mm male plug into the TRRS output of the source device (for example, a smartphone, tablet or laptop). Plug headsets or other TRRS‑equipped accessories into the two female 3.5 mm jacks. Confirm that connected headsets are fully seated and, if necessary, select the appropriate audio/microphone device in the source device settings. When both jacks are connected, audio and microphone signals are routed through the adapter according to device compatibility.

Recommendations

Use this adapter with devices and headsets designed for 4‑pole TRRS wiring. Avoid excessive bending near the connectors and disconnect by holding the plug to prevent strain on the cable. If microphone or remote control functions do not work after connection, check device settings and wiring compatibility (CTIA vs OMTP) before assuming a defect.