Dokovacia stanica ITEC i-tec USB-C Metal Nano 3x Display (DP, HDMI, VGA) s Power Delivery 100 W, 4x USB-A, Gigabit Ethernet

The ITEC i-tec USB-C Metal Nano 3x Display docking station is a compact wired hub that expands a laptop or tablet with multiple ports and supports up to three external monitors. It connects via an integrated 30 cm USB-C cable (USB 3.2 Gen 1) and provides video outputs (DisplayPort, HDMI, VGA), multiple USB-A and USB-C ports, Gigabit Ethernet, and up to 100 W USB Power Delivery for simultaneous charging.

Advantages

This docking station combines a small metal housing with broad connectivity: one DisplayPort, one HDMI and one VGA output for compatibility with both modern and legacy displays, four USB-A ports and one high-speed USB-C port, plus a Gigabit Ethernet port. It supports up to 4K/60 Hz on a single monitor and multi-monitor setups (up to three 1080p displays) and provides up to 100 W power delivery to charge compatible laptops via the same USB-C cable. Plug & Play operation requires no drivers for supported operating systems.

Suitable for

• Office workstations that need multiple external displays and wired network access
• Home offices and remote work setups with mixed modern and legacy monitors
• Presentations and meeting rooms where HDMI, DisplayPort or VGA connections are required
• Users who want a single-cable solution for charging, networking and peripherals

When it may not be suitable

If your macOS system requires multiple independent extended displays, note that macOS does not support MST; connected monitors may mirror the same image rather than function as separate screens. Also, the maximum Power Delivery is limited by the laptop or tablet’s USB-C power acceptance, so devices requiring more power than the dock can deliver will not charge at higher rates.

Key specifications

• Video outputs: 1× DisplayPort, 1× HDMI, 1× VGA (D-Sub)
• Maximum single-monitor resolution: up to 4K at 60 Hz
• Multiple-monitor support: up to 3× 1080p (or combinations up to device limits)
• Host interface: USB 3.2 Gen 1 (USB-C, 5 Gbps) with integrated 30 cm cable
• USB ports: 4× USB-A, 1× USB-C (5 Gbps)
• Ethernet: Gigabit Ethernet (10/100/1000 Mbps, RJ-45)
• Power Delivery: up to 100 W via USB-C (depends on connected device)
• Power consumption (idle/typical): low internal consumption ~10–15 W
• Material and weight: metal housing, approx. 0.112 kg
• Compatibility: Windows, macOS, Linux, Android, iPadOS, ChromeOS

How to use

Connect the integrated USB-C cable to a compatible laptop or tablet USB-C/Thunderbolt/USB4 port. Attach external displays to the DisplayPort, HDMI or VGA outputs as required and connect peripherals to the USB-A or USB-C ports. Plug an Ethernet cable into the RJ-45 port for wired network access. If available and supported by the host, the dock will provide up to 100 W power delivery to charge the connected device while in use. No driver installation is typically needed for supported operating systems; allow the host to recognise the dock after connection.

What to consider before purchase

• Check that your laptop or tablet USB-C port supports DisplayPort Alt Mode or a compatible alternate mode for video output
• Verify the host device’s ability to accept USB Power Delivery and the maximum charging power it supports
• macOS users should confirm multi-monitor behaviour, since MST-based multi-display setups may mirror screens
• Ensure required video outputs (HDMI, DisplayPort, VGA) match your monitors or have appropriate adapters

Recommendations

For best multi-monitor performance, connect the highest-resolution display to the DisplayPort or HDMI output for single-monitor 4K/60 Hz use; use VGA or HDMI for additional 1080p screens. Use a quality USB-C cable and verify host power delivery support to maximise charging speed.