Ethernetový kábel CAT6 UTP CABLETIME 2 m, čierny

The Cat6 cable is designed for structured computer networks, IP telephony, and transmission of data and video signals. This 2 m black UTP Cat6 patch cable with RJ45 connectors supports Gigabit Ethernet and is suitable for connections between computers, servers, switches, routers, IP cameras, set-top boxes and other network devices.

Advantages

Supports 10/100/1000 Mbps speeds and up to 250 MHz bandwidth for stable data transfer. Constructed with four unshielded twisted pairs (UTP) and an internal cross-shaped separator to reduce interference and improve signal integrity. Gold-plated copper contacts increase corrosion resistance and conductivity. PVC insulation and a polycarbonate RJ45 latch provide durability for up to 2000 insertions. Fully compatible with Cat5E configurations and common network equipment.

Key specifications

• Cable type: UTP Cat6 (unshielded)
• Connectors: RJ45 (male), 8-contact plugs, 8P8C
• Data transfer rate: 10/100/1000 Mbps
• Channel bandwidth: 250 MHz
• Internal conductor: CCA (aluminum with copper coating), 26 AWG
• Contacts: copper with gold plating
• Insulation: PVC
• Outer diameter: 6.0 mm
• Color: black
• Length: 2 m
• Usage: indoor
• Wiring standard: TIA/EIA-568B
• Warranty: 12 months

How to use

Connect one RJ45 plug to a network device (computer, switch, router, IP camera etc.) and the other plug to the corresponding port on the second device. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and sources of strong electromagnetic interference. Use indoors only and do not expose the cable to moisture or temperatures outside the device specifications.

Recommendations

For optimal performance in Gigabit networks, keep cable runs within recommended lengths for structured cabling and avoid running the Cat6 cable in parallel with high-voltage power lines. If outdoor or shielded installation is required, choose an appropriate outdoor-rated or shielded Cat6 variant.