Audio kábel Alcasa GC-M0055 5 m 3,5 mm modrý

The Alcasa GC-M0055 5m 3.5mm Blue audio cable is a five-metre, double-male connection cable designed for transmitting analogue stereo audio between consumer devices. Constructed with copper conductors and gold-plated 3.5mm plugs, the cable is intended to maintain signal clarity and reduce contact corrosion. Its five-metre length provides extended reach for home, office or mobile audio setups while the blue jacket helps visually distinguish it from other leads.

Advantages

The cable offers consistent stereo signal transfer over a 5 m distance and uses gold-plated connectors to improve contact reliability and resist tarnishing. Copper conductors support good conductivity for analogue audio frequencies, and the flexible outer jacket facilitates routing and storage. The colour-coded design simplifies identification among multiple leads.

Suitable for

• Connecting smartphones, tablets or laptops to speakers or car auxiliary inputs
• Linking portable audio players to home stereo systems or headphone amplifiers
• Temporary studio or desktop connections where a 5 m reach is required
• Audio demonstrations, presentations or classroom setups requiring an extended cable

Key specifications

• Cable length: 5 m
• Connector type (each end): 3.5 mm male stereo
• Conductor material: copper
• Contact finish: gold-plated plugs
• Colour: blue

How to use

Insert one 3.5mm male plug into the headphone or line-out jack of the source device and the other plug into the 3.5mm input of the receiving device. Ensure both jacks are fully seated to secure contact and avoid intermittent connection. Route the cable to minimise sharp bends or pinch points, and keep it away from power cables to reduce potential interference. Disconnect by pulling the plug straight out to avoid stress on the connector.

Recommendations

For best results, use the cable with devices that have standard 3.5mm stereo jacks and avoid excessive bending near the connector ends. Store coiled without tight kinks and periodically inspect plugs for dirt or oxidation; clean contacts gently if required. If you need a longer or shorter run, choose a cable length appropriate to the installation to minimise extras and signal handling.