HEINRICH KOPP Kopp Trojfázový elektromechanický elektromer 192204015

The Kopp 192204015 is a mechanical three-phase meter built for direct connection in sub-distribution boards. Unlike electronic meters that need auxiliary power or configuration, this electromechanical unit measures active energy with a roller counter that remains readable even when the supply is interrupted.

Highlights

• Three-phase direct connection for 3 x 230/400 V AC networks
• Nominal current 10 A, maximum 40 A, accuracy class 2
• Mechanical roller counter with 6+1 digits for kWh
• Compact 4 TE DIN rail housing, IP20

In daily use

The meter snaps onto a standard 35 mm DIN rail and is intended for internal consumption monitoring, not for billing. The roller counter shows total active energy without backlight or battery, and the device operates across a wide temperature range from -25 °C to +55 °C.

Full specifications

• Meter type: Electromechanical three-phase meter
• Number of phases: 3-phase
• Nominal voltage: 3 x 230/400 V AC
• Nominal current (In): 10 A
• Maximum current (Imax): 40 A
• Frequency: 50 Hz
• Accuracy class: Class 2 (active energy)
• Display: Mechanical roller counter, 6+1 digits (kWh)
• Measured energy: Active energy (kWh)
• Mounting: DIN rail 35 mm
• Module width: 4 TE
• Protection class: IP20
• Operating temperature: -25 °C to +55 °C
• Connection: Direct
• MID compliant: No

Final note

The Kopp 192204015 is a straightforward electromechanical meter for three-phase consumption tracking where billing-grade certification is not required.