Káblový sťahovák s bubnom c.k tools 495052 — dĺžka 20 m, 4 mm nylon, flexibilná vodiaca hlava, červená

The c.k tools cable pulling tape on a compact drum is a practical tool for routing electrical cable and wire through conduits, ducts and confined spaces. The tape is made of nylon with a 4 mm diameter and a 20 m working length. A flexible guiding head simplifies passage through bends and tight runs, while the red colour improves visibility when feeding or retrieving the tape. The unit is supplied as a single drum ready for use on site.

Advantages

The nylon construction provides a balance of strength and flexibility, resisting abrasion and reducing the risk of kinks. The compact drum stores the tape neatly to prevent tangles and allows controlled deployment and retraction. The flexible guiding head increases accessibility in curved or obstructed conduits and reduces the effort needed to thread cable. The red colour makes the tape easier to see in low-light or crowded installations.

Suitable for

Key specifications

How to use

Pull the required length of tape from the drum and feed the flexible guiding head through the conduit or access route until it emerges at the other end. Attach the cable to the tape using an appropriate connector or tape wrap, ensuring a secure, smooth joint to avoid snagging. Retract the tape onto the drum while guiding the cable through; keep steady tension to prevent snags and inspect the route periodically. After use, rewind the tape neatly onto the drum for storage.

Recommendations

Use appropriate personal protective equipment and avoid excessive force; do not use the tape to pull loads beyond its intended capacity. For best results in long or complex runs, combine the flexible guiding head with a lubricant designed for cable pulling and check that the conduit is clear of obstructions before insertion.