Kingston Technology FURY Beast 32 GB 5600 MT/s DDR5 CL36 DIMM biela RGB EXPO

Kingston FURY Beast DDR5 RGB 32GB (5600MT/s) is a high-performance 288‑pin DIMM memory module designed for modern gaming and professional PCs. It delivers DDR5 advantages such as increased banks and burst length for improved throughput, a nominal clock rate equivalent to 2800 MHz (5600MT/s) and a CAS latency of 36. The module includes a white heat spreader with customizable RGB lighting and operates at 1.25 V. It is 100% tested at speed and covered by a limited lifetime warranty.

Advantages

The Kingston FURY Beast DDR5 RGB combines faster data transfer and improved stability for overclocking thanks to on‑die ECC (ODECC). It supports Intel® XMP 3.0 and AMD EXPO™ profiles for easy performance tuning and lets you personalise lighting with Kingston FURY CTRL™ or motherboard RGB software. The new heat spreader design and patented Infrared Sync Technology™ ensure synchronised, vivid RGB effects.

Suitable for

• Gaming PCs requiring high-frequency DDR5 memory
• Content creation and multitasking workstations
• Systems where RGB customisation is desired
• Overclocking setups using Intel or AMD platforms

Key specifications

• Capacity: 32 GB (single module)
• Type: DDR5, 288‑pin DIMM
• Speed: 5600 MT/s (effective), 2800 MHz base clock
• CAS Latency: CL36
• Voltage: 1.25 V
• RGB lighting with Infrared Sync Technology™; white heat spreader
• Compatibility: Intel® XMP 3.0 and AMD EXPO™
• Manufacturer part number (MPN): KF556C36BWEA-32
• EAN: 0740617333510

How to use

Install the Kingston FURY Beast DDR5 module into an available 288‑pin DDR5 DIMM slot on a compatible motherboard following the motherboard manufacturer’s installation instructions. For optimal performance enable the appropriate Intel XMP 3.0 or AMD EXPO profile in BIOS/UEFI to apply rated speed, timings and voltage. Use Kingston FURY CTRL™ or your motherboard’s RGB utility to configure lighting effects. Ensure the system is powered off and unplugged before installation and handle the module by its edges to avoid static damage.

Recommendations

For system stability when overclocking, verify motherboard support for DDR5 5600 MT/s and update BIOS to the latest version. Install memory modules in matched channel slots as recommended by your motherboard manual, and run a memory test after installation to confirm stability.